Detergent dispenser W10861000 is an original equipment manufacturer (OEM) part that fits some Whirlpool, KitchenAid, Maytag and Amana dishwashers.
Detergent dispenser W10861000 attaches to the inner door panel and holds the dishwasher detergent and rinse aid in covered compartments.
This dishwasher detergent dispenser measures approximately 5 inches wide and 4.5 inches high.
Works with the following brands:
Whirlpool, KitchenAid, Maytag, Amana
Works with the following products:
Dishwasher
Fixes the following symptoms:
Will not dispense detergent, Door latch failure, Not cleaning dishes properly
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shrikant
July 25, 2022
The above dispenser has torsion spring with two arms inside the sliding cover. It helps in springing open the sliding cover,
Can I get only the spring?
For model number W10861000 Dishwasher Detergent Dispenser
Hi Shrikant,
Thank you for your question. The spring is not sold separately and is only sold with the dispenser. If you need help placing an order for the dispenser, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
November 10, 2023
Should the detergent dispenser always open when it's running?
For model number KDFE104DSS3
Hello Linda, thank you for your question. We have researched and found that the detergent dispenser opens when the control board signals it to dispense the detergent. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
I turned the dishwasher breaker off and turned off the water supply in case I had to move the dishwasher out to remove the door cover. I removed the screws with a star tip screwdriver on the inside cover of the door. Since I was able to remove the dispenser without completely removing the cover, I didn't have to move the dishwasher out
... Read morefurther. (I had about four inches of room to remove the dispenser). I had to pry the metal flanges on the door cover out a little that were surrounding the dispenser's bottom to bypass the small plastic edges holding the dispenser tight against the door cover. I removed the small wiring connector by pressing the small plastic retainer and pulled out the connector. I had a little bit of trouble removing the two plastic fastener clips holding the wiring to a bracket. I used a needle nosed plier to close the upper plastic tines to pull the clips through the holes. After I removed the old dispenser, I bent the metal flanges on the door cover back in. I pushed the new dispenser into the door cover and made sure I heard the the sound of the metal flanges clip onto the plastic lips of the dispenser. I turned the water and power back on and tested the operation of the new dispenser. The dispenser worked properly.
Read less
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11731570
Manufacturer Part Number: W10861000
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.