Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 5, 2023
Changed strike and latch ,but still dishwasher door not closed....
For model number KUDS01FLBL3
Hello Boris, thank you for your question. If the dishwasher door won't close or latch, it might be because the Door Spring PS11745531 tension is improperly set. We have a video that may be of some help. Good luck with your repair.
If your dishwasher door is not opening or closing properly, it may be time to install a new balance kit. This part helps to support the weight of the door as it opens and closes. You should also check on the condition of...
Dishwasher had power, but would not start wash cycle when door closed
FIRST: Took apart the dishwasher door, which was very easy, just unscrewing the screws on the inside of the door. Then, popped off the Control Panel on the top of the door, saw that the Door Latch mechanism was damaged (plastic prongs cracked off) so it no longer pushed a button on the Sensor that detects the door is closed (which is why the dishwasher wouldn't start). THEN: Simply used a small nut driver to pull off the Door Latch, unseated the Sensor, then replaced it with the new door latch, re-seated the Sensor. FINALLY: Snapped Control Panel back on, screwed door back together, and no problems after that!