This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.
-
Works with the following brands:
KitchenAid, Whirlpool, Maytag, Kenmore
-
Works with the following products:
Dishwasher
-
Fixes the following symptoms:
Not cleaning dishes properly, Door won’t close, Noisy, Door latch failure
-
Part# W10195416 replaces these:
W10195416V, W10195416VP
- Works with the following brands:
- KitchenAid, Whirlpool, Maytag, Kenmore
- Works with the following products
-
Dishwasher
- Fixes the following symptoms
- Not cleaning dishes properly, Door won’t close, Noisy, Door latch failure
Part Number Cross Reference
- Part# W10195416 replaces these:
-
W10195416V, W10195416VP