Rack Stop Clip
-
Product Description
The genuine OEM replacement rack stop clip is for dishwashers. It measures just over an inch and is made of gray plastic. The purpose of this part is to prevent your dishwasher rack from pulling out too far and falling out of the dishwasher. If you have difficulties closing your door, your rack continuously falling off, or a door latch failure, you may need to replace this part. They are sold individually and can be used on the right or left side of the upper dish rack. It is recommended to replace both sides at the same time, meaning you will need to order 2 of this part. For this easy repair, start by pulling out the rack, then use your screwdriver to reach behind the rack stops and push on the clips. This should allow you to remove the stops from the track. Next, slide the track back over the rollers and snap the new track stop in place.
-
Works with the following brandsKitchenAid, Kenmore, Whirlpool, Jenn-Air
-
Works with the following productsDishwasher
-
Fixes the following symptomsDoor won’t close, Door latch failure, Not cleaning dishes properly
-
Part Number Cross ReferencePart# WPW10195622 replaces these:AP6016778, W10195622, WPW10195622VP
Product Description
The genuine OEM replacement rack stop clip is for dishwashers. It measures just over an inch and is made of gray plastic. The purpose of this part is to prevent your dishwasher rack from pulling out too far and falling out of the dishwasher. If you have difficulties closing your door, your rack continuously falling off, or a door latch failure, you may need to replace this part. They are sold individually and can be used on the right or left side of the upper dish rack. It is recommended to replace both sides at the same time, meaning you will need to order 2 of this part. For this easy repair, start by pulling out the rack, then use your screwdriver to reach behind the rack stops and push on the clips. This should allow you to remove the stops from the track. Next, slide the track back over the rollers and snap the new track stop in place.
-
Works with the following brands:KitchenAid, Kenmore, Whirlpool, Jenn-Air
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Door won’t close, Door latch failure, Not cleaning dishes properly
-
Part# WPW10195622 replaces these:AP6016778, W10195622, WPW10195622VP
Videos For installing this part.
Replacing your Rack Stop Clip

Questions and Answers
Be the first to ask our experts a question about this part!
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
-
Customer:JAMES from Waterloo, IA
-
Parts Used:WPW10195622
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Customer:Donna from MIAMI SHORES, FL
-
Parts Used:WPW10195622
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Customer:Phil from GILBERT, AZ
-
Parts Used:WPW10195622
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Customer:Todd from Cherry Valley, IL
-
Parts Used:WPW10195622
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Customer:Richard from Suttons Bay, MI
-
Parts Used:WPW10195622
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
Manufacturer Part Number: WPW10195622