Part Location Diagram of WPW10077863 Whirlpool Water Supply Tube
See part 1 in the diagram
( Grid squares measure 1x1 inch )

Water Supply Tube

Rated by 2 customers 

?

Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$81.69
In Stock
Fix Number:
FIX11748132
Manufacturer #:
WPW10077863
Manufactured by:
Whirlpool

Product Description

This part includes the third level wash spinner.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Stefan from Buffalo, NY
Parts Used:
WPW10077863
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dishes in lower rack not being cleaned properly
Replaced the dishwater supply tube which had the rubber flap valves already installed in the part I ordered. It was secured in the dishwasher by 2 Philips screws which were easy to remove and reinstall.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Julie from San Diego, CA
Parts Used:
WPW10082831, WPW10077863, W10083957V
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Broken manifold probe, inoperable flap on feed tube assembly, and broken piece on chopper assembly
Neither my husband nor I had ever fixed a dishwasher; all we knew was that it wasn't getting the dishes clean. We started by looking at the filter, which needed cleaning but didn't fix the problem. Next we did a load of visibly dirty dishes to see which section of the dishwasher was having trouble (top middle). From there we looked up tro ubleshooting on our model and saw that one of the most likely problems would be the manifold probe, which we saw had a broken tip. The excellent diagrams on the website helped a lot.Then we read that the flaps on the feed tube assembly should close when the probe was not in it so we had to replace one of those. While everything else was out, we checked the chopper assembly and saw some plastic pieces had broken off. We placed our order and the parts from site arrived in a couple of days. Replacing the probe was simple--we just had to be careful not to break the tip. Replacing the feed tube assembly took a minute to snap in, but otherwise simple. The chopper assembly took the most time, since it involved taking out screws and removing the filter. Once everything was put back together, the dishwasher worked great.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11748132
Manufacturer Part Number: WPW10077863
Brand
Model Number
Description
Kenmore
66513222K600
Dishwasher
Kenmore
66513222K601
Dishwasher
Kenmore
66513223K600
Dishwasher
Kenmore
66513223K601
Dishwasher
Kenmore
66513229K600
Dishwasher
Kenmore
66513229K601
Dishwasher
Kenmore
66513632K900
Dishwasher
Kenmore
66513632K901
Dishwasher
Kenmore
66513632K902
Dishwasher
Kenmore
66513632K903
Dishwasher
Kenmore
66513633K900
Dishwasher
Kenmore
66513633K901
Dishwasher
Kenmore
66513633K902
Dishwasher
Kenmore
66513633K903
Dishwasher
Kenmore
66513639K900
Dishwasher
Kenmore
66513639K901
Dishwasher
Kenmore
66513639K902
Dishwasher
Kenmore
66513639K903
Dishwasher
Kenmore
66513722K600
Dishwasher
Kenmore
66513722K601
Dishwasher
Kenmore
66513723K600
Dishwasher
Kenmore
66513723K601
Dishwasher
Kenmore
66513724K600
Dishwasher
Kenmore
66513724K601
Dishwasher
Kenmore
66513729K600
Dishwasher
Kenmore
66513729K601
Dishwasher
Kenmore
66513732K600
Dishwasher
Kenmore
66513732K601
Dishwasher
Kenmore
66513732K602
Dishwasher
Kenmore
66513732K603
Dishwasher