Fuse Kit
$34.53
In Stock
Fix Number: FIX774514
Manufacturer #: 8193762
Manufactured by:
Whirlpool
-
Product Description
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
-
Works with the following brandsKenmore, KitchenAid, Whirlpool, Inglis
-
Works with the following productsDishwasher
-
Fixes the following symptomsWill Not Start, Not draining
-
Part Number Cross ReferencePart# 8193762 replaces these:AP3178588, 959376, 8193762, 8193762VP, 8269213
Product Description
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
-
Works with the following brands:Kenmore, KitchenAid, Whirlpool, Inglis
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Will Not Start, Not draining
-
Part# 8193762 replaces these:AP3178588, 959376, 8193762, 8193762VP, 8269213
Videos For installing this part.
Replacing your Fuse Kit
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:chuck from Hilton Head, SC
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
would not start. read the blog
just like the video very cool thanks
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jimmy from Mullins, SC
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Replaced fuse in dishwasher
Removed enter door panel, removed control panel and replaced fuse.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Steven from Galveston, TX
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Would start no response from touch pad
Followed instructions in video. Perfect
Was this instruction helpful to you?
Thank you for voting!
-
Customer:John from Benicia, CA
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:
Failed fuse (Thermal Cutoff)
Failed fuse (Thermal Cutoff) PN PS774514 1st lasted two weeks. I think it failed because I did not explicitly follow the instructions and cut off the 2 harness wires as instructed, thinking that a simple replacement of the fuse using the old connectors was sufficient (and very easy to do!). The cut off wires went into the new terminal block requires a really small screwdriver flat head to get adequate torque to clamp the extremely short stripped harness wire tight clamped.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Curtis from Zebulon, NC
-
Parts Used:8193762
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
No power
Watched video that was very helpful. Followed the instructional video as I went step by step.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:John from Benicia, CA
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
No power
Followed video fuse install instructions. Slightly different model for panel, but worked well. Diagnosis of possible problem was excellent, 55% likely it was the fuse since there was no power to the door op. panel yet there was power to the door from the plug. Did not use the 2 extraenous wires leading to the replacement fuse, simply a put the original slip-on connectorw on to the new fuse.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:David from Chaumont, NY
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
The primary fuse failed
This an easy fix. The website makes it easier. The dishwasher was not getting power (no lights just nothing) so the fuse was a likely culprit. A continuity test on the fuse verified this. The fix is easy. A video on the website shows the process. Remove the control panel, pop out the circuit board, remove the fuse and cut the wires. Reconnect the new fuse and reassemble. Don't for get to re connect the ribbon cable.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Terry from ASHEVILLE, NC
-
Parts Used:8193762
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
The dishwasher stopped near the end of the cycle, leaving water in the bottom.
First off, your web site gave me two choices on what the problem might be and the probability of the options. I choose the highest percent and it was correct. Installation was easy. My mistake but I did not follow the complete directions in that i did not replace the wires along with the fuse. I burned out the thermal fuse and on the next replacement i will follow all of the directions.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Maggie from Pacifica, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
Would not start
Installed the fuse and door switch, tested it and everything worked. (Installation was easy with the step by step video.) Loaded the dishwasher the next day and nothing worked. Checked my installation and still nothing. Must have had another problem. Gave up and bought a new one.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Vickie from Deerfield Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Would not complete a cycle. Would some times start up on it's own! Could not program properly.
I know nothing about electrical repairs but I knew that if I could buy the part and save a quoted repair bill of about $300, I was certainly going to learn! I used the video on the website showing the installation, it was so easy! I bought both the circuit board and the fuse thinking that I would only need the circuit board since the lights were still coming on. However, after installing the board and running one wash cycle the machine wouldn't run at all and there were no lights on the panel. I pulled it apart again and replaced the fuse, success! Have now been using the machine for over a month and no problems to report. Thank you.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Arthur L - March 16, 2022
Verified Purchase
quick search on net, and found my fix.
Major town power outage blew out the fuse in our dishwasher, rather then just buy a new one I figured I'd do a quick search online. Found Fix.com's video on replacing the thermal fuse. Found the right one for the job, ordered and replaced it. Dishwasher still running better then new and wife is very much pleased with it over the old dishwasher who's beard kept getting soaked by the dish soap and grumpy.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX774514
Manufacturer Part Number: 8193762
Manufacturer Part Number: 8193762
Brand
Model Number
Description