Part Location Diagram of 675806 Whirlpool Drain and Wash Impeller Kit
See part 19 in the diagram
Replacing your Kenmore Dishwasher Drain and Wash Impeller Kit
( Grid squares measure 1x1 inch )

Drain and Wash Impeller Kit 675806

★★★★★
★★★★★
1 Review

Rated by 9 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$109.07
In Stock
Fix Number:
FIX382822
Manufacturer #:
675806
Manufactured by:
Whirlpool

Product Description

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher.

Videos For installing this part.

Replacing your Drain and Wash Impeller Kit

Replacing your Drain and Wash Impeller Kit

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 9 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Cheri from Creekside, PA
Parts Used:
675806
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Dishwasher not draining. NO LEAK but not draining.
My dishwasher would not drain out. I had no leak underneath. But not draining. I was not sure which part to order, but ordered the Drain and Wash Impeller kit because it was the cause of the problem in more than 60% of cases. I ordered the part. Watched the video, tore my dishwasher down almost the whole way. Waited for the part to come. Once it got here, I finished taking the last of the parts off. I did not have the two small white balls shown in the video, in fact I did not have any balls. I had to use the chisel to bust off the impeller. It was cracked when I got it down that far, but it still would not come off. That was probably the most difficult part, getting that busted off. I am not by any means a repairwoman. But with these videos from parts select, I have repaired this dishwasher twice at low cost. I literally just followed the video step by step. Dishwasher repaired. Draining again and all is well. I found it to be a pretty easy repair.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
SAMUEL from DELAVAN, WI
Parts Used:
675806
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
impeller rotary siezed and was run thru 2 cycles
until I discover wed the problem. utensil lodged under lower washer arm and caused the motor to overheat and melt all plastic parts attached to it up to the main washer spinner.disassembled the lower washer unit all the way down to the pump where it enters the tub. removed all debris. ( melted parts) cleaned most lime/calcium deposits fro m run channels and the replaced with the new disposal/impeller kit. was very surprised by the size of the replacement parts because what was left that I found was less than 1\3 of the new kit. spun the motor stub gently to free it up( luckily it was thermally protected so the motor is fine.) assembled all and ran thru several cycles and I have not heard or seen this unit work this well in ages . I must note I bought this unit in 1998. Not a job for anybody tho .you need to know about plumbing ,electricity ,and mechanics.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Tomball, TX
Parts Used:
675806, 675703
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Noisy Dishwasher
My 20 year old + dishwasher started making a terrible noise during the entire wash cycle. I replaced all the components from the motor up inside the machine. I found the parts I needed and watched the instilation video. The call to this site was quick and easy and the parts arrived on time. I brought my laptop into the kitchen and watc hed the video again while I installed the replacement parts. EASY! Unfortunately, I only minimized the noise problem and I sounds a little better but the motor needs to be replaced. Looks like I will be shopping for a new dishwasher soon. Thanks .
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Racine, WI
Parts Used:
675806
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Noisey and Leaking Water
I watched the tutorial as I went along. Piece of cake.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Manuel from West Bend, WI
Parts Used:
675806
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Wrench set
Dishwasher not drainnig.
Well started by looking for videos of how to do it,found one on this site.Not exactly like mine but good enough.to do the job,replace all the parts that were in the kit,except the round ring, there was no place to install it,Did it fix my problem?(NO),the problem was in THE DRAINING TUBE.The one the has the little rubber flap in it,Had t o pull dishwasher out,disconnect water.and power unscrew the tube from pump and clean it,BINGO!.All is well now.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
alan from Albert Lea, MN
Parts Used:
675806
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
frig was'nt running all the time, ice cubes melting
frig wouldn't run all the time and the cubes were melting. I at first, would push the fan switch inside the freezer section, several times fast and it would kick in. I checked the symptoms here at Parts Select and ordered both the switch, and the thermostat thinking if the switch fixes it, i would send the thermostat back. put the switch in and it ran. next day it was wasn't again. pulled the thermostat and found little bulb on the end broken off. replaced and it runs great. very tight quarters to get at screws. take cube bin out. screws are behind plastic housing
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rick from Florence, SC
Parts Used:
675806, 675238
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Dishwasher would not drain
I looked on-line to find video help. There is plenty out there. The mechanical work was not difficult. The difficulty I experienced was getting the primary bolt to come off of the motor shaft. I was warned in one of the video that this part gets wet and will have some rust. They were right. I had to cut the wash impeller off of t he shaft. Other than that it was really easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Crozet, VA
Parts Used:
675806
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Washer does not empty
The teardown went exactly as the video. I found that it needed the "Complete Pump Seal Kit" (p/n PS382775) in order to make it like new. I highly recommend ordering them together.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Rochester, NY
Parts Used:
675806
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Water was not running through machine
I followed the youtube video on the site and made adjustments to my particular model with little difficulty. I did have to chisel out the impeller parts due to the age of the machine. Once reassembled dishwasher worked without issue.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX382822
Manufacturer Part Number: 675806
Brand
Model Number
Description
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
56461040
Refrigerator - REFRIGERATOR
Kenmore
56461042
Refrigerator - REFRIGERATOR
Kenmore
56461044
Refrigerator - REFRIGERATOR
Kenmore
56461047
Refrigerator - REFRIGERATOR
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher