Part Location Diagram of WP8558129 Whirlpool Detergent and Rinse Aid Dispenser
See part 8 in the diagram
Replacing your Kenmore Dishwasher Detergent and Rinse Aid Dispenser
( Grid squares measure 1x1 inch )

Detergent and Rinse Aid Dispenser WP8558129

★★★★★
★★★★★
1 Review

Rated by 9 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$90.25
In Stock
Fix Number:
FIX11746408
Manufacturer #:
WP8558129
Manufactured by:
Whirlpool

Product Description

This part releases the detergent and rinse aid into the dishwasher.

Videos For installing this part.

Replacing your Detergent and Rinse Aid Dispenser

Replacing your Detergent and Rinse Aid Dispenser

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharleen
September 30, 2021
Need small gray seal inside rinse agent dispenser has numbers 51263. 03. On the inside with 3 below that. About an inch circle.
For model number KUD101FLSS6
Fix.com logo
Hello Sharleen, thank you for writing. The inner parts for the Detergent and Rinse Aid Dispenser PartSelect Number PS11746408 are not sold individually. You will need to purchase the complete assembly. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Affresh Washing Machine Cleaner - 3 pack
$12.62
In Stock
Produce Preserver Filter
$21.56
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.14
In Stock
Cooktop Cleaning Cream
$15.58
In Stock
Cooktop Cleaner
$17.79
In Stock
Affresh Cleaner
$19.14
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 9 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
JOHN from SCOTT TOWNSHIP, PA
Parts Used:
WP8558129
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Door would not stay closed not dispensing cleaning aid at proper time , dished were dirty !
followed the video instructions and knowing which screws to remove and what hazards to watch for , made the project as easy as it's been done several times before , gives you an edge !!!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Luling, LA
Parts Used:
WP8558129
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Latch on rinse dispenser broken
I removed all of the screws on the door panel and the front would not separate from the back. I went to YouTube and watched the video instructions and did everything it indicated needed to separate. I then discovered that the styrofoam noise insulator between the panels was glued to both sides and needed to use a putty knife to get the gl ue seal broken, and after that the rest of the installation went fine.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brad from LA CONNER, WA
Parts Used:
WP8558129
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Broken latch on dispenser
-Remove the front cover (6 screws)
-Remove mounting brace & moisture cover (2 screws)
-Unplug power connector
-Remove old dispenser (4 more screws)
-Carefully fit new dispenser making sure all screw holes are
aligned
- insert all mounting screws before tightening
- Replace all other parts in reverse order.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Baltimore, MD
Parts Used:
WP8558129
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Soap dispenser did not hold onto rinse aid liquid
As per written directions and the u tube video. 45 min with gathering of tools. I was careful to avoid torquing down too much on screws going into plastic body, but I did get them tight. I ran a trial rinse cycle, and no leak, but it did leak when I washed a load. The difference was the wash cycle had lots of hot water, and the gasket softened. When I checked the 6 small screws, they were all loose. No leak when I tightened them. Query whether heating the gasket with a hair blower would allow the initial tightening to be better.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Mancos, CO
Parts Used:
WP8558129
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Broken rinse aid despenser
Changinv out the rinse aid despenser was a no brainer. But Whirlpool had redesigned the part, so that I thought the wrong part had been sent. I called and there was a note in the computer explaining the new design and the need to abandoning of one of the wire connectors and how to secure the cable .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Henderson, NV
Parts Used:
WP8558129, WP8533381, 8193504
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Rinse aid dispenser was not dispensing.
The video for the dispenser replacement on the website was pretty clear and the overall replacement was pretty simple. The one complication was that the door on our stainless steel model had been glued on with what appeared to be insultating foam. Consequently, pulling off the door required a lot more hard yanking than the video indica ted and I would have thought necessary. After that the replacement was easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Elverson, PA
Parts Used:
WP8558129
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
door on soap dispensor wouldn't stay shut due to detergent buildup on surface
Your video was very helpful. Took off door front, easy after that Thanks. John Also, ordered one day, delivered next day. Great
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Ocala, FL
Parts Used:
WP8558129
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
The dishwasher soap dispenser would not stay closed
The dispenser was clogged with soap debris which kept the dispenser door from locking. I cleaned the washer by running and empty load with CLR which freed most of the debris. I scraped off the remaining debris with a small knife and it now works fine. I'm keeping the new dispenser as a spare and will use it the next time the unit goes bad.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Valerie from Sevierville, TN
Parts Used:
WP8558129
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
The detergent dispenser's lid didn't close anymore. Plastic latch broke.
I couldn't do the repair. I had no screwdriver that would fit the totally different screws the door had, so I had to call a handyman friend to help me. He has all the tools one may need, but he didn't have that special screwdriver either, so he needed to use pliers to take the screws out and then change the screws to something more "norma l", in case I need to do the repair again... Also, the part was different than the original so I was a tad confused. It's working now, but I couldn't have done it without my friend's help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11746408
Manufacturer Part Number: WP8558129
Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66514353300
Dishwasher
Kenmore
66514353301
Dishwasher
Kenmore
66515872000
Dishwasher
Kenmore
66515874000
Dishwasher
Kenmore
66515879000
Dishwasher
Kenmore
66515882000
Dishwasher
Kenmore
66515884000
Dishwasher
Kenmore
66515887000
Dishwasher
Kenmore
66515889000
Dishwasher
Kenmore
66515892100
Dishwasher
Kenmore
66515894100
Dishwasher
Kenmore
66515899100
Dishwasher
Kenmore
66515912000
Dishwasher
Kenmore
66515912001
Dishwasher
Kenmore
66515914000
Dishwasher
Kenmore
66515914001
Dishwasher
Kenmore
66515919000
Dishwasher
Kenmore
66515919001
Dishwasher
Kenmore
66515922000
Dishwasher
Kenmore
66515922001
Dishwasher
Kenmore
66515923000
Dishwasher
Kenmore
66515923001
Dishwasher
Kenmore
66515924000
Dishwasher
Kenmore
66515924001
Dishwasher
Kenmore
66515929000
Dishwasher
Kenmore
66515929001
Dishwasher