Jump to:
Product Description
The rack slide end cap attaches to the rails of the upper dishrack, to prevent it from sliding all the way out. It is a one-inch white plastic part that can break over time. This might be the part you need if you are not able to close the dishwasher door properly. If this part is worn or damaged, it can be replaced by popping out the cap with a small flat-blade screwdriver and snapping the new one in its place. If the rear cap needs to be replaced, you will need to remove both the front caps and completely remove it for full access. Keep in mind that this part is sold individually, and more than one may be required, depending on your repair. This is an inexpensive part, so we suggest purchasing several at a time to have on hand in case you need it.
-
Works with the following brands:General Electric, Hotpoint, Kenmore
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Not cleaning dishes properly, Door won’t close, Door latch failure
-
Part# WD12X10304 replaces these:AP4484666, 1556527, WD12X0344, WD12X10238, WD12X344, WD30X93 ... Show more , WD30X97 Show less
- Works with the following brands:
- General Electric, Hotpoint, Kenmore
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Not cleaning dishes properly, Door won’t close, Door latch failure
- Part# WD12X10304 replaces these:
- AP4484666, 1556527, WD12X0344, WD12X10238, WD12X344, WD30X93, WD30X97
Videos For installing this part.
Replacing your RACK SLIDE END CAP
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
- Customer:
- Renee from North Chesterfield, VA
- Parts Used:
- WD12X10327, WD12X10304
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Customer:
- Thomas from Boulder, CO
- Parts Used:
- WD28X31819, WD12X10327, WD12X10304
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
- Customer:
- Jim from ROSEVILLE, CA
- Parts Used:
- WD12X10304
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Customer:
- Ronald from PALM DESERT, CA
- Parts Used:
- WD12X10304
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Randall L from Macon, GA
- Parts Used:
- WD12X10304
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Helen from Burlingame, CA
- Parts Used:
- WD12X10304, WD28X10049
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
- Customer:
- Douglas from Bandera, TX
- Parts Used:
- WD28X31819, WD28X31820, WD12X10304, WD8X228, WD8X227, WD24X10018
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
- Customer:
- Minh from Mission Viejo, CA
- Parts Used:
- WD28X31820, WD12X10304
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
2. Slide out the old upper rack assembly.
3. Install the new upper rack assembly into the slides.
4. Pop in the new end cap. Done.
- Customer:
- Lauren from Temple Terrace, FL
- Parts Used:
- WD12X10304
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Customer:
- Myron from Pembroke Pines, FL
- Parts Used:
- WD12X10304
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- < Prev
- 1
- 2
- Next >
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: WD12X10304
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.