Inlet Sump WD18X10039
$36.00
In Stock
- Fix Number:
- FIX1765981
- Manufacturer #:
- WD18X10039
- Manufactured by:
- GE
Jump to:
Product Description
This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Not draining, Leaking
-
Part# WD18X10039 replaces these:AP4300603, 1263969
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Not draining, Leaking
- Part# WD18X10039 replaces these:
- AP4300603, 1263969
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Lajos from Houston, TX
- Parts Used:
- WD12X10408, WD18X10039, WD24X10041, WD18X202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Wrench (Adjustable)
rat t destroyed hose chamber ans fill hose
was pretty forward easy if follow repair video
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lajos from HOUSTON, TX
- Parts Used:
- WD18X10039, WD24X10041, WR50X10068, WR55X10025, WD28X265
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Wrench (Adjustable)
inlet sump hole made by rat
it went well took three hours to r&r part all went well advise taking your time.
remove screws that secure the dishwasher and slowly pull the dishwasher to make sure electricity turn off and then unplug from the wall outlet then pull slowly from the opening very lower part of the dishwasher is your water line turn water off locati ... Read more on under kitchen sink turn off and go and unscrew the water one under the dishwater fitting is 1/2 in unscrew you will have a little water coming out undo the dishwasher drain line as a clamp undo clamp and disconnect line beware as something to catch water w
remove screws that secure the dishwasher and slowly pull the dishwasher to make sure electricity turn off and then unplug from the wall outlet then pull slowly from the opening very lower part of the dishwasher is your water line turn water off locati ... Read more on under kitchen sink turn off and go and unscrew the water one under the dishwater fitting is 1/2 in unscrew you will have a little water coming out undo the dishwasher drain line as a clamp undo clamp and disconnect line beware as something to catch water w
Read less
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Tomball, TX
- Parts Used:
- WD18X10039
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Dishwasher not draining at the end of the cycle
I pulled the dishwasher from underneath the counter and disconnected water and power. I removed the spray arm fine filter, inlet cover and sump cap (in that order). I then flipped the washer on its side and disconnected the pump from the sump. This allowed me to push the sump out from below. It had a whole in the inner wall that allowi
... Read more
ng water that should be going out the drain pipe to go back into the inlet side. I flipped it back up right and inserted the new sump and then reassembled in reverse order from above. Flipped on it's side again and reattached the pump. Reattached water and power and it works like a champ now.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1765981
Manufacturer Part Number: WD18X10039
Manufacturer Part Number: WD18X10039
| Brand | Model Number | Description |
|---|---|---|
| General Electric | ADW1100N00BB | Dishwasher |
| General Electric | ADW1100N00WW | Dishwasher |
| General Electric | ADW1100N10BB | Dishwasher |
| General Electric | ADW1100N10WW | Dishwasher |
| General Electric | ADW1100N15BB | Dishwasher |
| General Electric | ADW1100N15WW | Dishwasher |
| General Electric | ADW1100N20BB | Dishwasher |
| General Electric | ADW1100N20WW | Dishwasher |
| General Electric | ADW1100NB | Dishwasher - GE Dishwasher Model ADW1100NB Parts |
| General Electric | ADW1100NW | Dishwasher - GE Dishwasher Model ADW1100NW Parts |
| General Electric | GFSD234P00BB | Dishwasher |
| General Electric | GFSD234P00SB | Dishwasher |
| General Electric | GFSD234P00WW | Dishwasher |
| General Electric | GFSD551P00BB | Dishwasher |
| General Electric | GFSD551P00SB | Dishwasher |
| General Electric | GFSD551P00WW | Dishwasher |
| General Electric | GHDA350N00BB | Dishwasher |
| General Electric | GHDA350N00WW | Dishwasher |
| General Electric | GHDA350N10BB | Dishwasher |
| General Electric | GHDA350N10WW | Dishwasher |
| General Electric | GHDA350N20BB | Dishwasher |
| General Electric | GHDA350N20WW | Dishwasher |
| General Electric | GHDA356N00SS | Dishwasher |
| General Electric | GHDA356N10SS | Dishwasher |
| General Electric | GHDA356N20SS | Dishwasher |
| General Electric | GHSD307P00SB | Dishwasher |
| General Electric | GHSD307P00WW | Dishwasher |
| General Electric | GHSD511P00BB | Dishwasher |
| General Electric | GHSD511P00SB | Dishwasher |
| General Electric | GHSD511P00WW | Dishwasher |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.