16729156-1-M-GE-WD05X30818-HEATING ELEMENT

( Grid squares measure 1x1 inch )

16729156-1-S-GE-WD05X30818-HEATING ELEMENT

16729156-2-S-GE-WD05X30818-HEATING ELEMENT

16729156-3-S-GE-WD05X30818-HEATING ELEMENT

HEATING ELEMENT WD05X30818

$48.35

Fix Number:: FIX16729156
Manufacturer #:: WD05X30818
Manufactured by:: GE

Jump to:

Product Description
Questions and Answers
Related Parts
Model Compatibility

Product Description

If your dishes are not dry after a cycle in the dishwasher, they may be an issue with the heating element. This part is used to heat the water in the dishwasher while it is running, and then helps to dry the dishes after they have been cleaned. This is a genuine OEM replacement part for your appliance. Before beginning this repair, be sure to disconnect the power supply to your dishwasher.

Works with the following brands:

General Electric
Works with the following products:
Dishwasher
Fixes the following symptoms:

Not drying dishes properly, Not cleaning dishes properly, Leaking
Part# WD05X30818 replaces these:

WD05X10015, WD05X21294, WD05X21716, WD05X23763, WD05X24776

Works with the following brands:: General Electric
Works with the following products: Dishwasher
Fixes the following symptoms: Not drying dishes properly, Not cleaning dishes properly, Leaking
Part# WD05X30818 replaces these:: WD05X10015, WD05X21294, WD05X21716, WD05X23763, WD05X24776

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Richard

December 15, 2023

How do I install the heating element

For model number GDF5706GF8CC

Hi Richard, thank you for your question! To install the heating element, you may follow the instructions given: 1. Remove the screws that hold the dishwasher to the countertop. 2. Put a towel in the plastic container just in case the water will leak down. 3. Use wrench, and take over the waterline. 4. Use a nut driver, lose the hose clamp. 5. Pull out the dishwasher from the cabinet. 6. Place the dishwasher on the side and remove the wires from the heating element terminals. 7. Use a large plier and unscrew the plastic nuts. 8. Place the dishwasher back on its feet. 9. Open the door and remove the bottom rack. 10. Take out the lower spray arm. 11. Un-thread the screws that hold the mounting brackets and remove the brackets that hold the element. 12. Pull out the heating element and install the new heating element. You may follow the instructions backward to reassemble the dishwasher. We hope this information is useful!

Was this helpful?