Part Location Diagram of WD09X21321 GE Dishwasher Door Handle
See part 713 in the diagram
( Grid squares measure 1x1 inch )

Dishwasher Door Handle WD09X21321

Works With Model PDT720SSH5SS!
$81.17
In Stock
Fix Number:
FIX11736562
Manufacturer #:
WD09X21321
Manufactured by:
GE
Works With Model PDT720SSH5SS!

Product Description

Screws NOT included.

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
May 7, 2026
How does the old handle come off and the new installed?
For model number GE GDT695SSJ5SS dishwasher
Fix.com logo
Hello Dave, thank you for reaching out to us. To replace the dishwasher door handle, you must first disconnect the water supply and drain lines located underneath the sink. Once the utilities are clear, remove the screws securing the dishwasher to the countertop and carefully pull the unit out far enough to access the door cables. You must disconnect the wiring harness for the control board and remove the door cables from the hinges to allow the door to be taken off. After setting the door on a protected surface, remove the silverware basket and the vent cover. Use a quarter-inch nut driver to remove the screws holding the inner and outer door panels together, then pull the hinges out. Separate the inner door panel from the outer panel to gain access to the handle mounting screws. Remove the vent from the inner door, then use a 3/8-inch socket to unscrew and remove the old handle. Position the new handle into place, aligning it with the existing holes, and secure it firmly with the mounting screws. Reattach the vent to the inner panel before reconnecting the inner and outer door panels. Secure the panels together with the original screws and reinstall the hinges, ensuring the correct thread types are used for the upper and lower positions. Finally, reassemble the vent cover, silverware basket, and door onto the dishwasher, reconnecting all cables and lines in reverse order to finish the installation. We hope this information helps!

Was this helpful?
Thank you for voting!

Model Compatibility

This part works with the following models:
Fix Number: FIX11736562
Manufacturer Part Number: WD09X21321
Brand Model Number Description
General Electric CDT725SSF0SS Dishwasher
General Electric DDT575SMF0ES Dishwasher
General Electric DDT575SMF2ES Dishwasher - DISHWASHER
General Electric DDT575SMF4ES Dishwasher - DISHWASHER
General Electric DDT575SMF5ES Dishwasher - DISHWASHER
General Electric DDT575SMF6ES Dishwasher - DISHWASHER
General Electric DDT575SMF7ES Dishwasher - DISHWASHER
General Electric DDT575SMF8ES Dishwasher - DISHWASHER
General Electric DDT575SSF0SS Dishwasher
General Electric DDT575SSF2SS Dishwasher - DISHWASHER
General Electric DDT575SSF4SS Dishwasher - DISHWASHER
General Electric DDT575SSF5SS Dishwasher - DISHWASHER
General Electric DDT575SSF6SS Dishwasher - DISHWASHER
General Electric DDT575SSF7SS Dishwasher - DISHWASHER
General Electric DDT575SSF8SS Dishwasher - DISHWASHER
General Electric DDT595SMJ0ES Dishwasher - DISHWASHER
General Electric DDT595SMJ2ES Dishwasher
General Electric DDT595SMJ4ES Dishwasher
General Electric DDT595SMJ5ES Dishwasher
General Electric DDT595SSJ0SS Dishwasher - DISHWASHER
General Electric DDT595SSJ2SS Dishwasher
General Electric DDT595SSJ4SS Dishwasher
General Electric DDT595SSJ5SS Dishwasher
General Electric GDT530PSD0SS Dishwasher
General Electric GDT530PSD1SS Dishwasher
General Electric GDT530PSD2SS Dishwasher
General Electric GDT530PSD4SS Dishwasher - DISHWASHER
General Electric GDT530PSD6SS Dishwasher - DISHWASHER
General Electric GDT535PSJ0SS Dishwasher - DISHWASHER
General Electric GDT535PSJ2SS Dishwasher - DISHWASHER