The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This gray door gasket is made of rubber and measures approximately 73 inches. For this repair, open the dishwasher door and remove the lower dish tray. Use your hands to pull out the old gasket. Clean the channel with a rag. Press the new gasket in place so it sits inside the groove in the door. Keep the door closed tightly for a few hours to ensure a strong seal is made.
Works with the following brands:
Frigidaire, Kenmore, Crosley, Gibson
Works with the following products:
Dishwasher
Fixes the following symptoms:
Leaking, Door won’t close, Not cleaning dishes properly
Part# 154827601 replaces these:
AP5690109, 2705419, 154827601, 154211801, 154219501, 154561001
...
Show more, 154561002, 154782401, 154845301 Show less
Works with the following brands:
Frigidaire, Kenmore, Crosley, Gibson
Works with the following products
Dishwasher
Fixes the following symptoms
Leaking, Door won’t close, Not cleaning dishes properly
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Timothy
January 19, 2022
When replacing the tub gasket/door seal once the channel is clean would it be ok to lightly smear some silicone at different points to ensure the gasket/seal stays in place.
For model number FFBD2407LS0B
Hello Timothy, Thank you for the question. To prevent damaged, silicone or adhesive is not required. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Heath
August 3, 2022
Gasket to long should I cut it 1 1/2 inches??
For model number MDB120RFM3
Hi Heath,
Thank you for your question. We do not recommend cutting any additional length off on the tub gasket if any is present during your repair. We have included a link to one of our YouTube videos that you may reference on how to install the tub gasket. The dishwasher in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Charles
December 16, 2021
What is the size (cross section) of this gasket that you sell? I got a replacement that was supposed to fit this model frigidaire dishwasher from another company and it was too big and it was too big-- door did would not close. The gasket in place is about 3/8" x 3/8". The replacement from other company was 1/4" x 1/4" and had a cross section that looked like an 8 while original is simple oval.
For model number PLDB998AC1
Hello Charles, thank you for writing. Thank you for writing. We actually do not have the exact sizing listed on the gasket. However, using your model number, we can confirm that the part PartSelect Number PS8260227 is the correct one for you. We also have a video showing how to install it. We hope this helps.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposure to water, deterge...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
I ordered the top 3 parts in terms of probability of solving the problem (water inlet valve, tub gasket, and bottom door gasket). I installed all 3 and it did not solve the door leak. Then I realized that the bottom door gasket had come out (in other words, I had not installed it properly). I reinstalled the bottom door gasket (a criti
... Read morecal point is that it has to be *pressed in* firmly -- there should be some resistance), and it worked. Note that the bottom door gasket is a hybrid between a true seal and a splash guard. The notch in the middle is designed to drain water from the door back into the tub. Because of that notch opening, there is sputtering and splashing at various points of the wash cycle. This appears to be by design, and those splashes result in water being absorbed by the insulating foam. Thank you to the previous submission/posting authors, as this is what clued me in.
Opened the door, read directions, inserted the seal. Make sure to read the direction and let the washer sit with new seal for a day with door locked (as best you can) before using.
dishwasher still leaked after changing the tub gasket
removed the old gasket, cleaned the door gasket area, installed new gasket. Dishwasher still leaked at corners on bottom of door Bought a new dishwasher and am having it installed next tuesday
Pulled the old gasket out and pushed the new gasket in making sure not to pull on the gasket . Cleaned the gasket surface inside where the gasket is installed.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
