OEM Frigidaire Dishwasher Water Inlet Valve - 120V 60Hz [154637401] | Ships Today | Fix.com
Water Inlet Valve - 120V 60Hz – Part Number: 154637401
Water Inlet Valve - 120V 60Hz – Part Number: 154637401 Water Inlet Valve - 120V 60Hz – Part Number: 154637401 Water Inlet Valve - 120V 60Hz – Part Number: 154637401 https://fixcom.azureedge.net/Schematics/Frigidaire/3CKRAE5U.gif

Water Inlet Valve - 120V 60Hz

Your Price
$32.74

Fix Number: FIX1990907

Manufacturer #: 154637401

Manufactured by: Frigidaire

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Works with the following brands

Frigidaire, Kenmore, Crosley, Gibson, Westinghouse, Tappan, Uni, Kelvinator

Works with the following products

Dishwasher

Fixes the following symptoms

Leaking | Will not fill with water | Not cleaning dishes properly | Not draining

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 16 reviews
>
<
Customer:
Robert from Copiague, NY
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Stalled timer, dirty dishes, detergent wasn't dissolving properly.
At first I thought the Timer was bad because it was stalling. The Timer only malfunctioned in High Temp Wash or High Temp Rinse mode. After removing and checking the timer, I determined it was working OK. Someone mentioned that a bad thermostat could cause the Timer to stall, but I wasn't having any problems with hot water temperature. I noticed the detergent wasn't dissolving completely, and the water flowing into the tub sounded weak, so I replaced the water inlet valve. This solved all my problems. Dishes are coming out sparkling clean and the Timer doesn't stall in High Temp mode. I just followed the video on Part Select to make the repair. I didn't pull out the whole dishwasher from the counter and I removed the Lower Door panel in addition to the Kick Plate. Removing the Lower Door Panel provided easier access to the valve. I hope this helps other people troubleshoot their dishwasher. Once again this site saved me a chunk of money.
4 of 4 people found these instructions helpful

Were these instructions helpful?   

Customer:
Allen from Linthicum Heights, MD
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Water inlet valve had a slow leak. Needed replacing.
Turn off water supply. Remove inlet hose. Remove front kick plate. Remove filler tube. Remove screws securing water inlet valve. Remove electrical connector from water inlet valve. Reverse procedure with new water inlet valve. Turn water supply on. Check for leaks. Success.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kenneth from Clermont, FL
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Water valve was leaking
Just took out the old and replaced with the new. It's in front of the appliance, on the bottom, so it was easy to get to. Just like your video demonstrated.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
James from Shortsville, NY
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers
Inlet valve leaking
Had to move dishwasher out to replace the supply line (didn't have a separate shutoff or a union). After that was out of the way it took me less than ten minutes to replace the valve. If you have to do it this way-don't forget to turn off the electric power. Otherwise it's a piece of cake to do.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
James from Aberdeen, WA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set
The water inlet valve was leaking at the solenoid.
I cut off the power and the water. Then I opened the door and removed the two screws up top anchoring it to the counter. Next i pulled it far enough out of its niche (a little over a foot) that I could get at the valve from the side easily. I've done several of these before and find that, while it's possible to change them working strictly from the front, it's actually quicker and much easier to pull them out a bit. Then I removed the kick panel, (two more screws) and slid a small shallow pan underneath the pump to catch the water. Next, I pulled the electrical clip off the solenoid. I used open end wrenches to unscrew the supply hose and pliers to loosen the spring clamp on the fill tube and slide it out past the end of the outlet nipple. The tube stuck a little bit but was not hard to twist off by hand. Finally, I removed the two screws holding the valve to the frame and pulled it out. I screwed the new valve into place and attached everything in the opposite order I took them off. The nipple for the fill tube came out of the new valve at a different angle from the old one so I had to adjust the tube a little. I turned on the water and power and checked for leeks. Then I put it back in its hole.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
shari from hawaiian gardens, CA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench (Adjustable)
No water coming into diswasher
My son helped me flip the dishwasher on its side. I unscrewed the bolts on side of water inlet value, unscrewed the water hose and another hose. put in new water inlet value and reattached other hose, turned dishwasher on and YES I could here the water in the dishwasher. I went one step further and opened dishwasher to make sure it was really water spraying in there and again YES it was. I was so happy I fixed my dishwasher without paying hundreds of dollars for a repair person or buying a new dishwasher, It cost me a whopping $25.18 to fix not including shipping cost.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Steve from North Myrtle Beach, SC
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Dishwasher was making a high pitched noise in the wash cycle as well as filling with water when it was off
Just disconnect the power plug, shut off the water supply, disconnect the supply and drain hoses removed the two screws anchoring the unit and slid it out. I laid it on its side and the repairs were simple. The motor comes out after a little twisting to unseat the seal. Be sure to lube the new o-rings with a little dishsoap and it will go in easy. The water inlet valve was very easy to replace, no instructions necessary.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
RICHARD from PEACHTREE CITY, GA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Low inlet water supply
replaced water inlet valve
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Patrick from Pleasanton, CA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Leak from door
I ordered the top 3 parts in terms of probability of solving the problem (water inlet valve, tub gasket, and bottom door gasket). I installed all 3 and it did not solve the door leak. Then I realized that the bottom door gasket had come out (in other words, I had not installed it properly). I reinstalled the bottom door gasket (a critical point is that it has to be *pressed in* firmly -- there should be some resistance), and it worked. Note that the bottom door gasket is a hybrid between a true seal and a splash guard. The notch in the middle is designed to drain water from the door back into the tub. Because of that notch opening, there is sputtering and splashing at various points of the wash cycle. This appears to be by design, and those splashes result in water being absorbed by the insulating foam. Thank you to the previous submission/posting authors, as this is what clued me in.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Larry from Tower City, PA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Dishwasher would not fill with water
Basically, I found the online video on the website to be a great tool. Followed the instructions, and everything went together perfectly.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
frances from woodbridge, VA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
No water entering dishwasher
part is removed by taking out 2 screws. Then take off wire ,supply hose and drain hose. very easy and part worked fine.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kate from Minneapolis, MN
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Overflow because water didn't turn off even when unplugged
After watching the video first tried to fix without pulling out the dishwasher from the cabinet. Couldn't turn the wrench so pulled out the machine and tipped it on it's side. Easy to remove all the connections. Had to get a replacement elbow value since the old one wouldn't loosen from the old water inlet valve. That trip to the store was the longest part of the repair. :) Having rags and a bucket were helpful since there was some water in the drain pipe that came off and flowed everywhere when we tipped the machine on it's side. Easy to reconnect everything and put the dishwasher back in place.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Darin from NEW HYDE PARK, NY
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Water inlet valve was leaking
Had my coffee, shut power to unit, turn off water supply. Disconnect water supply line, unplug wire harness, unscrew 2 screws. Pull valve down take hose clamp off hose. Take out valve, unscrew Brass L fitting. Take old plumber's tape off. Clean threads to fitting, plus gook on inside. Put new plumber's tape on threads, re-attach fitting to new valve. Attach hose, put hose clamp back on. Screw back onto frame with 2 screws, plug in wire harness then connect water supply line. Turn power back on, turn water on, check for leaks. Now enjoy dish washing bliss
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Thuy from Cotter, AR
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set
Water leaking
Turned off water supply and unplugged the power cord. Disconnected the water line from the old valve. We decided then it's easier to pull the dishwasher out to do this repair than leave it in place. This way we can see the area better and not having to lay down on the floor. it's peace of cake after that since the new inlet valve came as one unit all we had to do was putting the unit in place ( the old inlet valve has part to screw in). However, when we turned the dishwasher back on to check, it's still leaking. Only this time with the dishwasher out we were able to see where the water coming from: the water tubing has a hole at the bent area. So back to this site and order new water tubing. Again easy job. We got our dishwasher back running with an extra new part (no complain here). Thank you for all the instructions, tips and quick shipping.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Nan from Culver City, CA
Parts Used:
  • Water Inlet Valve - 120V 60Hz
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dishwasher water inlet valve
The repair guy confirmed the part I needed and told me to buy it online for $22 because the repair service would charge me $80 for the part. I was worried I'd have to wait, but I ordered from this site on Tuesday evening and the part arrived Thursday! I paid $120 for the repair guy to install the part.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX1990907
Manufacturer Part Number: 154637401
Brand
Model Number
Description
Kenmore
58714001990
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714002990
Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Kenmore
58714012412B
Dishwasher - DISHWASHER
Kenmore
58714013401
Dishwasher
Kenmore
58714013408A
Dishwasher - DISHWASHER
Kenmore
58714013409A
Dishwasher - DISHWASHER
Kenmore
58714013410B
Dishwasher - DISHWASHER
Kenmore
58714013411B
Dishwasher - DISHWASHER
Kenmore
58714013412B
Dishwasher - DISHWASHER
Kenmore
58714013413B
Dishwasher - DISHWASHER
Kenmore
58714014407A
Dishwasher - DISHWASHER
Kenmore
58714014408A
Dishwasher - DISHWASHER
Kenmore
58714014409B
Dishwasher - DISHWASHER
Kenmore
58714014410B
Dishwasher - DISHWASHER
Kenmore
58714014411B
Dishwasher - DISHWASHER
Kenmore
58714014412B
Dishwasher - DISHWASHER
Kenmore
58714019407A
Dishwasher - DISHWASHER
Kenmore
58714019408A
Dishwasher - DISHWASHER
Kenmore
58714019409B
Dishwasher - DISHWASHER
Kenmore
58714019410B
Dishwasher - DISHWASHER
Kenmore
58714019411B
Dishwasher - DISHWASHER
Kenmore
58714019412B
Dishwasher - DISHWASHER
Kenmore
58714022200A
Dishwasher - DISHWASHER
Kenmore
58714023200A
Dishwasher - DISHWASHER