Part Location Diagram of 154106202 Frigidaire Heating Element Brass Nut
See part 18 in the diagram
Replacing your Frigidaire Dishwasher Heating Element Brass Nut
( Grid squares measure 1x1 inch )

Heating Element Brass Nut 154106202

Works With Model GDB755RJB1!

Rated by 4 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$7.82
In Stock
Fix Number:
FIX1524878
Manufacturer #:
154106202
Manufactured by:
Frigidaire
Works With Model GDB755RJB1!

Product Description

This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will solve this problem. The tools needed for this repair are a 1/2 inch wrench, 1/4 inch nut driver, and needle nose pliers. To repair, locate the two element heating nuts. Next, disconnect connecter wire and remove nut with wrench. Tip: when installing new nut, remember to add insulator sleeve back on. As a safety precaution, remember to disconnect the water supply line before beginning this installation. Also, unplug your dishwasher from the power source.

Videos For installing this part.

Replacing your Heating Element Brass Nut

Replacing your Heating Element Brass Nut

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Heating Element
$73.42
In Stock
Element Grommet
$5.86
Special Order
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
janet from Galena, MO
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
water leaking out bottom
turned off power to dishwasher at the elec. panel. removed the "kickplate" off front bottom of dishwasher. leak was coming from where the heating element went thru tub. removed connector from bottom of heating element and brass nut practically fell off. it was cracked. ordered new brass nuts from this site it arrived quickly and installe d it immediately. used a deep well socket to tighten the nut and leak was gone. Waaa Laaa!!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Stoneham, MA
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Heating element connection leaking
There was a serious leak coming from under the dishwasher. I backed out the mounting screws and pulled it out onto the kitchen floor. Emptied out the water and turned it on its side. The brass nut holding one end of the heating element was cracked and loose. I ordered the replacement part, installed it and the leak was fix. Really simple
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
susan from weare, NH
Parts Used:
154106202
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Water leaking from heating element
Disconnect electricity to dishwasher then I removed panel of dishwasher I removed old copper nuts and replaced with new copper nuts tightened slightly with open wrench. Turn electricity back on run washer a few minutes to check for leaks . No leaks replace front panel. If still leaking repeat tightening with wrench recheck for leaks.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Hanson, KY
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Cracked nut
Removed wire connections and plastic sleeve and nut-replaced. Only trouble was- had to replace water line as well. Old line was metal-replaced with flex hose
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX1524878
Manufacturer Part Number: 154106202
Brand
Model Number
Description
Frigidaire
004621710A
Dishwasher - Dishwasher
Frigidaire
004621711A
Dishwasher - Dishwasher
Frigidaire
1031-005A
Dishwasher - DISHWASHER
Frigidaire
1041-002A
Dishwasher - DISHWASHER
Frigidaire
1071-003A
Dishwasher - DISHWASHER
Frigidaire
1081-000A
Dishwasher - DISHWASHER
Kenmore
5661558580
Dishwasher - Kenmore Dishwasher Model 566.1558580 (5661558580, 566 1558580) Parts
Kenmore
5871400090
Dishwasher
Kenmore
5871400091
Dishwasher
Kenmore
5871400190
Dishwasher
Kenmore
5871400191
Dishwasher
Kenmore
58714001990
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714002990
Dishwasher
Kenmore
5871400890
Dishwasher
Kenmore
5871400891
Dishwasher
Kenmore
587140091
Dishwasher
Kenmore
5871400990
Dishwasher
Kenmore
5871400991
Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Kenmore
58714012412B
Dishwasher - DISHWASHER
Kenmore
58714012413B
Dishwasher - DISHWASHER
Kenmore
58714012414B
Dishwasher - DISHWASHER
Kenmore
58714012415B
Dishwasher - Kenmore 58714012415b Dishwasher
Kenmore
58714012416B
Dishwasher - Dishwasher
Kenmore
58714013401
Dishwasher