Assembly Brush 290680001

This is an Authentic Manufacturer Sourced replacement part used on a Ridgid Hammer Drill/Driver. This Assembly consists of: Plastic Ring Holder, Four (4) Metal Brush Holders with Springs and Four (4) Carbon Brushes with a Lead Wires Attached. To replace this assembly you would need a Screwdriver • First remove Screws holding the cover together • Carefully remove Two (2) Halves of the housing to gain access to Motor Housing • Disconnect the Wires from the Brush Assembly • Remove the old Brush Assembly and replace it with the New Brush Assembly • Reconnect the wires • Reassemble and test your tool