11744318-1-M-Whirlpool-WP74009336-Burner Electrode
Part Location Diagram of WP74009336 Whirlpool Burner Electrode
See part 10 in the diagram
11744318-1-S-Whirlpool-WP74009336-Burner Electrode 360 view
( Grid squares measure 1x1 inch )
11744318-1-S-Whirlpool-WP74009336-Burner Electrode 11744318-1-S-Whirlpool-WP74009336-Burner Electrode 360 view
Part Location Diagram of WP74009336 Whirlpool Burner Electrode

Burner Electrode

Rated by 3 customers 

?

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$41.57
In Stock
Fix Number: FIX11744318
Manufacturer #: WP74009336
Manufactured by: Whirlpool
  • Product Description

    This burner electrode, also known as a burner igniter, is a genuine OEM replacement part for your gas range. When the burner knob is depressed and turned, this part is used to create a spark that lights the gas, providing the flame for your burner. If the igniter glows but will not light, it should be replaced. The electrode measures approximately 1.5 inches in length and is located under the burner. This part has a male spade terminal, and the mounting bracket included, but if a new wire lead is required it will need to be purchased separately. Please be sure to disconnect the power and gas supply to your range before beginning this repair.

  • Works with the following brands
    Jenn-Air, KitchenAid, Maytag
  • Works with the following products
    Cooktop, Range
  • Fixes the following symptoms
    Gas igniter glows, but will not light, Will Not Start, Element will not heat
  • Part Number Cross Reference
    Part# WP74009336 replaces these:
    AP6011124, 74009336, 7432P121-60, WP74009336VP
2 Related Parts Questions and Answers
3 Installation Instructions Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This burner electrode, also known as a burner igniter, is a genuine OEM replacement part for your gas range. When the burner knob is depressed and turned, this part is used to create a spark that lights the gas, providing the flame for your burner. If the igniter glows but will not light, it should be replaced. The electrode measures approximately 1.5 inches in length and is located under the burner. This part has a male spade terminal, and the mounting bracket included, but if a new wire lead is required it will need to be purchased separately. Please be sure to disconnect the power and gas supply to your range before beginning this repair.

  • Works with the following brands:
    Jenn-Air, KitchenAid, Maytag
  • Works with the following products:
    Cooktop, Range
  • Fixes the following symptoms:
    Gas igniter glows, but will not light, Will Not Start, Element will not heat
  • Part# WP74009336 replaces these:
    AP6011124, 74009336, 7432P121-60, WP74009336VP

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Burner Knob - Stainless Color
$31.48
Part Number: FIX11744702
This replacement burner knob is made of plastic, painted in a stainless-steel color. It is a genuine OEM part for your range or cooktop, and designed to fit onto a D-shaped shaft. No tools are required to replace this pa...
$31.48
In Stock
Screw, Igniter
$8.04
Part Number: FIX11745563
This screw is sold individually.
$8.04
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Gregory from Austin, TX
  • Parts Used:
    WP74009336
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
The igniter on the gas burner was cracked and shorting out, thus it was failing to ignite the burner
In order to replace the igniter, I removed the cooking grate, then the burner cap. Next I removed two screws holding the burner in place. I was then able to lift the burner, and disconnect the electrode wire. Then, by removing one screw on the under side of the burner, I could remove the old igniter and replace it with the new one. I reversed the procedure in order to finish the repair.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Pamela from Guttenberg, IA
  • Parts Used:
    WP74009554, WP74009336
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
After searching the surrounding area for an appliance stoy cooktop thatre that would repair m needed a new burner electrode,
I gave up. Then I found this site found the part number I needed for the repair, and repaired it myself! Saved myself 100 bucks!! EASY! Not bad for a 53 y/o country gal. Pretty self explanatory. One hint: after disconnecting the electrode, tape the spark wire to something larger than the hole for the wire so that it doesn't slide back down through the hole. It wouldn't be much fun fishing it out.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    john from willows, CA
  • Parts Used:
    WP74009336
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
would no spark
no problem until trying to remove the screw holding the sparker to the element, took 2 plus hours to remove screw
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX11744318
Manufacturer Part Number: WP74009336
Brand
Model Number
Description
Jenn-Air
JDS8850BDB
Range
Jenn-Air
JDS8850BDS
Range
Jenn-Air
JDS8850BDS19
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850BDW
Range
Jenn-Air
JDS8850BDW18
Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air
JDS8850CDB00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDB01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDR00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS02
Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air
JDS8850CDW00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDW01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8860BDP
Range
Jenn-Air
JDS8860BDP16
Range - 30" GAS DUAL FUEL
Jenn-Air
JDS8860BDP17
Range - 30" DUAL FUEL GAS RANGE
Jenn-Air
JGC
Cooktop - JENNAIR COOKING
Jenn-Air
JGC8430BDB
Cooktop
Jenn-Air
JGC8430BDQ
Cooktop
Jenn-Air
JGC8430BDS
Cooktop
Jenn-Air
JGC8430BDW
Cooktop
Jenn-Air
JGC8430CDB10
Cooktop
Jenn-Air
JGC8430CDS10
Cooktop
Jenn-Air
JGC8430CDW10
Cooktop
Jenn-Air
JGC8536ADB
Cooktop
Jenn-Air
JGC8536ADQ
Cooktop
Jenn-Air
JGC8536ADS
Cooktop
Jenn-Air
JGC8536ADW
Cooktop
Jenn-Air
JGC8536BDB10
Cooktop
Jenn-Air
JGC8536BDB11
Cooktop - 36" GAS COOKTOP