9870708-1-M-Ridgid-079027005911-Pressure Switch
Part Location Diagram of 079027005911 Ridgid Pressure Switch
See part A-8 in the diagram
9870708-1-S-Ridgid-079027005911-Pressure Switch 360 view
( Grid squares measure 1x1 inch )
9870708-1-S-Ridgid-079027005911-Pressure Switch 9870708-1-S-Ridgid-079027005911-Pressure Switch 360 view
Part Location Diagram of 079027005911 Ridgid Pressure Switch

Pressure Switch 079027005911

$ 53.24
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9870708
Manufacturer #:
079027005911
Manufactured by:
Ridgid

Product Description

This authentic Ridgid replacement pressure switch is specially made for air compressors. The switch reacts to the changing pressure in a system. It will turn your motor on and off based on the preset pressure. If your pressure switch developed leaks it should be replaced for compressor to operate as intended. This item is sold individually. Replacing this pressure switch you would need a wrench set, nut driver set and a thread-sealing tape to complete this repair. • Unplug the unit and drain the tank • Remove the pressure gauge • Remove the switch tube • Remove the pressure regulator assembly • Disconnect the wires • Remove the safety valve • Install the new pressure switch • Reassemble in reverse order • Test the air compressor

  • Works with the following brands:
    Ridgid
  • Works with the following products:
    Compressor