17016288-1-M-Campbell Hausfeld-WL021100AV-S-Manifold Assembly
Part Location Diagram of WL021100AV-S Campbell Hausfeld Manifold Assembly
See part 23 in the diagram
( Grid squares measure 1x1 inch )
17016288-1-S-Campbell Hausfeld-WL021100AV-S-Manifold Assembly Part Location Diagram of WL021100AV-S Campbell Hausfeld Manifold Assembly

Manifold Assembly WL021100AV-S

$ 135.19
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX17016288
Manufacturer #:
WL021100AV-S
Manufactured by:
Campbell Hausfeld

Product Description

This replacement regulator/manifold manifold assembly is specially manufactured for Campbell Hausfeld air compressors. The manifold kit consists of the manifold, the regulator, two pressure gauges, two quick-disconnects, and the nipple that connects the entire assembly to the air tank. The manifold kit will solve any problems related to a cracked manifold assembly, as well as any problems with the regulator. To complete this repair job correctly you may need : Phillip's screwdriver, hex drivers, long-nosed pliers, wrenches and heavy-duty wire cutters. • Depressurize the tank • Remove the manifold cover • Remove the pressure hose • Remove the pump assembly from the tank • Remove the manifold • Remove the manifold nipple • Transfer the safety valve • Install the new manifold kit • Secure the the pump assembly • Reinstall the hose • Reattach the manifold cover • Ensure everything is connected and test the compressor

  • Works with the following brands:
    Campbell Hausfeld, Husky
  • Works with the following products:
    Compressor
  • Part# WL021100AV-S replaces these:
    WL017601AV, WL021100AV