10054196-1-M-Campbell Hausfeld-WL209802SJ-Fan Kit-Impeller
Part Location Diagram of WL209802SJ Campbell Hausfeld Fan Kit-Impeller
See part B-10 in the diagram
10054196-1-S-Campbell Hausfeld-WL209802SJ-Fan Kit-Impeller 360 view
( Grid squares measure 1x1 inch )
10054196-1-S-Campbell Hausfeld-WL209802SJ-Fan Kit-Impeller 10054196-1-S-Campbell Hausfeld-WL209802SJ-Fan Kit-Impeller 360 view
Part Location Diagram of WL209802SJ Campbell Hausfeld Fan Kit-Impeller

Fan Kit-Impeller WL209802SJ

$ 63.18
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10054196
Manufacturer #:
WL209802SJ
Manufactured by:
Campbell Hausfeld

Product Description

This replacement impeller fan kit is specially designed for Campbell Hausfeld and Ridgid air compressors. It is supplied directly from original equipment manufacturer and it is sold individually. This part of the pump produces the air flow to build up the pressure in the tank. This kit includes (1) plastic impeller, a metal washer and a screw. To complete this repair you would need a screwdriver. • Make sure the unit is unplugged • Remove the shroud • Remove the screw that secures the old impeller • Remove the old impeller • Secure the new impeller with the hardware • Reattach the shroud

  • Works with the following brands:
    Campbell Hausfeld, Ridgid
  • Works with the following products:
    Compressor