Part Location Diagram of 5010000809 Coleman Regulator Assembly For Propane Coffee Maker
See part A-2 in the diagram
( Grid squares measure 1x1 inch )

Regulator Assembly For Propane Coffee Maker 5010000809

$ 31.86
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10241200
Manufacturer #:
5010000809
Manufactured by:
Coleman

Product Description

This is a genuine OEM replacement part guaranteed to safely work with the Coleman 10-Cup Portable Propane Coffee Makers, models 2000008052 and 2000008430. The regulator is designed to control the flow of propane during use; the dial features marked intervals for each flow's purpose. When not in use, the regulator can be clipped into the holders located on the back of the machine. To Install This Part: • Screw the regulator hand tight into the connector at the rear side of the coffeemaker • Remove the plastic cap from the top of the propane bottle; screw the propane bottle hand tight into the regulator • Never operate the coffeemaker with the propane cylinder in an inverted position • To ignite, turn the regulator valve to "HIGH" and press igniter button repeatedly until the burner lights