Part Location Diagram of 879553 DeWALT LEAD 320MM
See part 95 in the diagram
( Grid squares measure 1x1 inch )

LEAD 320MM 879553

$ 0.00
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX18987301
Manufacturer #:
879553
Manufactured by:
DeWALT

Product Description

This manufacturer sourced carbon brush is a genuine replacement part, not an aftermarket equivalent. It is specially produced for Porter Cable and Delta saws. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. When replacing brushes it is a good idea to inspect your armature for burns, cracks, or other damage which can indicate other issues with the motor. It is recommended to replace both brushes at the same time. This item includes one carbon brush with a lead wire and a spring attached. Please note, brush holders are sold separately. Replacing this carbon brush you will need a screwdriver to get the job done. • Ensure the saw is unplugged • Remove screws that secure the cover • Remove the motor housing • Remove the old brush • Install the new brush • Reassemble and test the saw