10123692-1-M-Milwaukee-23-66-1815-Service Switch Replacement (NoTrigger Lock)
Part Location Diagram of 23-66-1815 Milwaukee Service Switch Replacement (NoTrigger Lock)
See part 63 in the diagram
( Grid squares measure 1x1 inch )
10123692-1-S-Milwaukee-23-66-1815-Service Switch Replacement (NoTrigger Lock) Part Location Diagram of 23-66-1815 Milwaukee Service Switch Replacement (NoTrigger Lock)

Service Switch Replacement (NoTrigger Lock) 23-66-1815

$ 16.02
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10123692
Manufacturer #:
23-66-1815
Manufactured by:
Milwaukee

Product Description

This is a genuine manufacturer approved replacement part used on Milwaukee saws. It is part of the tool handling on/off operations. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a screwdriver. • Make sure the saw is unplugged • Remove screws holding two pieces of housing/handle together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

  • Works with the following brands:
    Milwaukee
  • Works with the following products:
    Circular Saw