10171641-1-M-DeWALT-394149-01-Handle Assembly
Part Location Diagram of 394149-01 DeWALT Handle Assembly
See part A-20 in the diagram
10171641-1-S-DeWALT-394149-01-Handle Assembly 360 view
( Grid squares measure 1x1 inch )
10171641-1-S-DeWALT-394149-01-Handle Assembly 10171641-2-S-DeWALT-394149-01-Handle Assembly 10171641-3-S-DeWALT-394149-01-Handle Assembly 10171641-1-S-DeWALT-394149-01-Handle Assembly 360 view
Part Location Diagram of 394149-01 DeWALT Handle Assembly

Handle Assembly 394149-01

$ 11.38
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10171641
Manufacturer #:
394149-01
Manufactured by:
DeWALT

Product Description

This is a manufacturer approved replacement handle assembly. It is specially designed for Dewalt circular saws. This handle provides a stable grip for a safe control of equipment. It is made out of yellow plastic and it is sold individually. Please note, the hardware to attach it, is sold separately. To replace this handle assembly you should only need a screwdriver. • Ensure the saw in unplugged • Remove the screws that secure the handle • Disconnect switch wires and remove the switch • Remove old handle • Secure the switch in the new handle • Attach wires to the switch • Secure the new handle using the hardware

  • Works with the following brands:
    DeWALT, Craftsman
  • Works with the following products:
    Circular Saw
  • Part# 394149-01 replaces these:
    394149-01