Part Location Diagram of CB458 Makita Carbon Brush CB-458, 2 Pcs/Set
See part 41 in the diagram
( Grid squares measure 1x1 inch )

Carbon Brush CB-458, 2 Pcs/Set CB458

★★★★★
★★★★★
1 Review

Rated by 1 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$4.99
On Order
Fix Number:
FIX10156666
Manufacturer #:
CB458
Manufactured by:
Makita

Product Description

This part includes two OEM carbon brushes with the wire leads attached. Your tools motor requires two carbon brushes to create electricity for the armature. It is common for the carbon brushes to wear down over time, and this is why it is important to continually inspect them and replace them as part of your regular maintenance. If you notice sparks around the commutator, this may indicate a worn brush or a damaged armature, so we recommend inspecting both. To access this part you will need to remove the rear cover.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Armature Assembly 115V
$21.89
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gary from AVON PARK, FL
Parts Used:
CB458, 517646-0
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Armature was shorted (Used only three times)
Disassembly is simple enough but please remove the brushes before pulling out the armature. It is imperative as the commutator ring will catch on the brushes otherwise. Slipped in the new armature and installed the new brushes and reassembled. Runs smoothly and performs as expected. Old brushes were not worn at all as it was used very little but installed new ones anyway.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX10156666
Manufacturer Part Number: CB458
Brand
Model Number
Description
Makita
GA4030
Angle Grinder - 4" Angle Grinder
Makita
GA4030K
Angle Grinder - 4&#34 Angle Grinder
Makita
GA4530
Angle Grinder - 4-1/2&#34 Angle Grinder
Makita
GA4530X
Grinder - Grinder
Makita
GA4534
Angle Grinder - Paddle Switch Angle Grinder
Makita
GA5030K
Grinder - Grinder
Makita
JS1602
Nibbler & Shears - Shear
Makita
TM3000C
Chop Saw - Oscillating And Cutoff Tool
Makita
TM3000CX1
Chop Saw - Oscillating And Cutoff Tool
Makita
TM3010C
Chop Saw - Oscillating And Cutoff Tool
Makita
TM3010CX1
Multi-Tool - Multi-Tool Kit