Part Location Diagram of WP9704230 Whirlpool Drive Coupling
See part 12 in the diagram
Replacing your KitchenAid Blender Drive Coupling
( Grid squares measure 1x1 inch )

Drive Coupling WP9704230

★★★★★
★★★★★
14 Reviews

Rated by 58 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$9.43
In Stock
Fix Number:
FIX11746921
Manufacturer #:
WP9704230
Manufactured by:
Whirlpool

Product Description

This genuine OEM drive coupling is used in your blender and attaches to the motor shaft in order to spin the blades. If your old coupling has become stripped or the teeth have cracked off, it should be replaced so that your blender runs properly. Remove the old coupling by using a flat blade screwdriver to pry it off. Use a cloth to wipe down the threads, ensuring there is no remaining debris. The new coupling has reverse threads, so it will be screwed on counterclockwise to the motor shaft. Please ensure that the appliance is unplugged before you begin any repairs.

Videos For installing this part.

Replacing your Drive Coupling

Replacing your Drive Coupling

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 58 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Sandra from Marion, OH
Parts Used:
WP9704230
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
When I discovered the coupling on by blender was bad, I threw the blender in the trash. Several hours later I retrieved it thinking I should be able to fix it.
I looked up the needed part on this website and ordered it. It arrived a few days later. I pried off the old coupling with a screwdriver and screwed the new coupling on. The blender works great. Thanks!
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bobby from NEWBURY PARK, CA
Parts Used:
WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
my coupler was chewed to pieces
disconnected power

followed instructions sent with coupler

took about ten (10) minutes

LIKE NEW AGAIN
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Greencastle, PA
Parts Used:
WP9704230
Difficulty Level:
Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
drive coupling was worn
This is the second time we have replaced the drive coupling on the Kitchen Aid blender. It has been a few years. I love this blender and can not buy a new one for the price to repair .We are in our eighties, not as strong as we were, so once we got the coupling prized off it was a snap. Directions... just use screwdriver to pry off the c oupling NOTE it is a LEFT HAND thread do this turn as you pry up
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
J. Llewellyn from Scranton, PA
Parts Used:
WP9704253, WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Stripped coupling teeth and broken jar collar
I followed simple instruction to pry off coupling, cleaned the surfaces and screwed on the new one.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dottie from Elkton, TN
Parts Used:
WP9704230
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Rubber dry rotted and no longer turning the blades of the blender
Used a pry bar to help lift the old coupler while turning clockwise. Once the old one was off, carefully cleaned the area and replaced it with the new coupler by turning counter clockwise. My screwdriver was not big enough to help get the old one off as suggested by the written instructions that came with the new part.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GUY R from McALESTER, OK
Parts Used:
WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn out drive coupling
Used a dial caliper to determine the size of the open end wrench needed to hold the motor shaft under the coupling. It measured 9mm. I had to grind down the flats of the wrench in order to insert it under the drive coupling within the length of the flats on the shaft. After that the replacement was very easy. My recommendation is to inclu de the wrench with the drive coupling. The 9mm wrench cost me $5.00.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bella from Yakima, WA
Parts Used:
WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The drive coupling broke
I used the flat head screwdriver to pry the old coupling off, cleaned the threads off & hand tightened the new coupling on. Very easy!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elaine from Hanson, MA
Parts Used:
WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Broken coupling
Very good once I got the old one off the new one went on very easy. Thank you for the instructions
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from An Diego, CA
Parts Used:
WP9704230
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Coupling had worn down
Removed with screwdriver old coupling. New coupling replaced by counter clockwise spin on
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edgardo R. from Thibodaux, LA
Parts Used:
WP9709707, WP9704230
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Change blender drive coupling
Just followed the installation instructions on the web site and the print instructions that came with the part. Great service and fast delivery. Now I have a brand new blender thank's to you.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (14 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
  • 5
    12
  • 4
    2
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX11746921
Manufacturer Part Number: WP9704230
Brand
Model Number
Description
KitchenAid
4KSB5BK4
Blender
KitchenAid
4KSB5BU4
Blender
KitchenAid
4KSB5CR4
Blender
KitchenAid
4KSB5ER4
Blender
KitchenAid
4KSB5GN4
Blender
KitchenAid
4KSB5MC4
Blender
KitchenAid
4KSB5MY4
Blender
KitchenAid
4KSB5OB4
Blender
KitchenAid
4KSB5PK4
Blender
KitchenAid
4KSB5SSOB
Blender
KitchenAid
4KSB5TG4
Blender
KitchenAid
4KSB5WH4
Blender
KitchenAid
4KSB5WW4
Blender
KitchenAid
5KSB5-4
Blender - BLENDER
KitchenAid
5KSB52-4
Blender
KitchenAid
5KSB52AAC4
Blender
KitchenAid
5KSB52ABU4
Blender
KitchenAid
5KSB52ACR4
Blender
KitchenAid
5KSB52AER4
Blender
KitchenAid
5KSB52AGR4
Blender
KitchenAid
5KSB52AMC4
Blender
KitchenAid
5KSB52AMY4
Blender
KitchenAid
5KSB52ANK4
Blender
KitchenAid
5KSB52AOB4
Blender
KitchenAid
5KSB52APK4
Blender
KitchenAid
5KSB52ATG4
Blender
KitchenAid
5KSB52AWH4
Blender
KitchenAid
5KSB52BAC4
Blender
KitchenAid
5KSB52BAC5
Blender
KitchenAid
5KSB52BBU4
Blender