Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: WP9704230 /
Manufactured by: Whirlpool /
Fix #: FIX11746921
Manufacturer #: WP9704230 |
Manufactured by: Whirlpool |
Fix #: FIX11746921
disconnected powerfollowed instructions sent with couplertook about ten (10) minutesLIKE NEW AGAIN
Were these instructions helpful?
Used a dial caliper to determine the size of the open end wrench needed to hold the motor shaft under the coupling. It measured 9mm. I had to grind down the flats of the wrench in order to insert it under the drive coupling within the length of the flats on the shaft. After that the replacement was very easy. My recommendation is to include the wrench with the drive coupling. The 9mm wrench cost me $5.00.
I looked up the needed part on this website and ordered it. It arrived a few days later. I pried off the old coupling with a screwdriver and screwed the new coupling on. The blender works great. Thanks!
I followed simple instruction to pry off coupling, cleaned the surfaces and screwed on the new one.
I used the flat head screwdriver to pry the old coupling off, cleaned the threads off & hand tightened the new coupling on. Very easy!
Very good once I got the old one off the new one went on very easy. Thank you for the instructions
Removed with screwdriver old coupling. New coupling replaced by counter clockwise spin on
Used a pry bar to help lift the old coupler while turning clockwise. Once the old one was off, carefully cleaned the area and replaced it with the new coupler by turning counter clockwise. My screwdriver was not big enough to help get the old one off as suggested by the written instructions that came with the new part.
Just followed the installation instructions on the web site and the print instructions that came with the part. Great service and fast delivery. Now I have a brand new blender thank's to you.
I saw the short video on your site when I went to order the part. I knew nothing about it but saw how easy your video was so tried it before I even got the part. Came off so easy and when I did get the part (4 days later) I took it out of the package, put it on and it is fixed. Thanks for making me look good.
One-third of the produce grown globally is wasted due to throwing…