Char-Broil Grill Elements and Burners

Char-Broil Appliance Parts

Popular Char-Broil Grill Elements and Burners

Stainless Steel Infrared Emitter
$28.91
On Order
★★★★★
★★★★★
2 Reviews
Fix Number
FIX10294069
Manufacturer Part Number
80021356
This Emitter is sourced directly from Char-Broil and is an authentic OEM replacement part for Char-Broil grills. For full compatibility, please see the "Model Cross Reference List" below. The emitter is responsible for radiating and transmitting heat to fuel without exposure to flame. If the part is rusty or damaged, it needs to be replaced. The Emitter is approximately 18.35"L, 8.89"W, and 5/8" thick. This Emitter is only designed to be paired with a cast iron cooking grate (Part #80021355). Emitters are sold individually.
Cooking Grate Infrared Emitter
$42.85
In Stock
Fix Number
FIX16503094
Manufacturer Part Number
G533-2200-W1
This stainless steel infrared emitter plate is designed for Char-Broil Tru-Infrared gas grills, providing even heat distribution and protecting food from direct flames for consistent cooking results. As part of the Tru-Infrared system, it converts heat from the burners into infrared energy, ensuring flavorful, evenly cooked meals. Ideal for replacing worn or damaged plates, this OEM component restores performance and durability. Each plate measures approximately 17 3/16" x 10", and multi-pack options typically cover a total area of about 17 3/16" x 30". Installation is simple—just position the plates within the cooking grate system for optimal heat control.
Main Burner
$15.26
In Stock
Fix Number
FIX16502961
Manufacturer Part Number
G466-2500-W1
Main Burner
$18.54
In Stock
Fix Number
FIX10294908
Manufacturer Part Number
G432-Y700-W1
This is an original Char-Broil replacement part manufactured for use with outdoor grills. The burner is used to disperse flames evenly across the firebox. Over time the burner tubes can corrode and replacing damaged burners can extend the life of the grill. The main burners are sold individually.
Cooking Grate Infrared Emitter
$31.05
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX16502781
Manufacturer Part Number
G362-2100-W1
This infrared emitter plate fits Char-Broil Commercial and Signature Series grills, promoting even heat and reducing flare-ups for improved cooking results.
Electrode Main Burner
$7.79
In Stock
Fix Number
FIX16502873
Manufacturer Part Number
G432-8S01-W1
Cooking Grate Infrared Emitter
$41.78
On Order
Fix Number
FIX16502960
Manufacturer Part Number
G466-2400-W1
This stainless steel infrared emitter grate is designed for Char-Broil 3-burner Tru-Infrared gas grills, providing even heat distribution and reducing flare-ups for consistent grilling results. Positioned beneath the main cooking grates, it absorbs heat and radiates it upward while vaporizing drippings to enhance flavor and prevent flare-ups. Each grate measures approximately 17-1/8" x 8-1/8", and multi-pack options typically cover the full cooking area. Ideal for replacing worn or damaged emitter plates, this OEM component restores performance and durability. Installation is simple—just place the grate under the cooking grates for optimal heat control.
Burner Tube
$16.35
In Stock
Fix Number
FIX10293530
Manufacturer Part Number
80013421
This is a genuine Char-Broil replacement part. it is sold individually. The burners are the part of the grill that the flame rises from. This burner is equipt with spider guards. The Burners flame is controlled by the control knobs that are attached to the Valve/Manifold/Regulator. It is a good idea to keep these clean and covered as they have a tendency to rust and corrode. Includes wire mesh spider guards.
Burner Brace
$11.98
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX16502945
Manufacturer Part Number
G466-0047-W2
This burner brace is a replacement support component designed to stabilize and position a burner assembly securely. It helps maintain proper alignment and is commonly replaced when bent, warped, or damaged by heat or wear.
Main Burner-searing Burner
$15.26
On Order
Fix Number
FIX16503256
Manufacturer Part Number
G652-1600-W1
This stainless steel main burner tube is designed to deliver even, consistent heat across the grill cooking surface. By distributing gas efficiently, it helps ensure reliable ignition and uniform cooking performance. Built for durability, this replacement burner is ideal for restoring proper heat output when an existing burner becomes rusted, corroded, or uneven, helping maintain dependable grilling results.

Related Char-Broil Grill Parts