Shop OEM Washer Wire Plugs and Connectors

Drive Block - 2 5/16 Inch High

$19.63

Fix Number: FIX11741977
Manufacturer Part Number: WP389140

This drive block connects the spin basket to the drive shaft in large-capacity washers, allowing proper spinning during cycles. At 2-5/16 inches high, it’s easy to install with basic tools. Replace if you notice noise, shaking, or poor spinning.

Fixes these symptoms

Leaking
Spins slowly
Will not agitate
See more...

Moisture Sensor Wire Harness

$29.98

Fix Number: FIX3529394
Manufacturer Part Number: 6631EL3003B

This moisture sensor wire harness connects the sensor bars to the dryer’s control board, enabling accurate detection of fabric dampness to prevent over-drying and improve energy efficiency. Designed for a precise fit, this single harness ensures proper communication between the sensors and the control system, restoring optimal drying performance when the original part fails. Common signs of failure include clothes remaining too wet or becoming over-dried. For safety, disconnect power before installation and follow manufacturer guidelines.

Terminal and Wire Kit

$59.43

Fix Number: FIX334181
Manufacturer Part Number: 279318

This terminal and wire kit helps repair electrical connections in your dryer by replacing worn or damaged wires. It includes wires, screws, and wire nuts, but the terminal block is sold separately. Use this kit to fix heating issues caused by faulty wiring and restore your dryer’s performance.

Wire Harness

$83.04

Fix Number: FIX12348902
Manufacturer Part Number: W11193817

This OEM wire harness ensures proper electrical connections in Whirlpool washing machines, linking the control panel, motors, sensors, and valves for smooth operation. It transmits power and signals to keep cycles running correctly. Common signs of failure include starting issues, malfunctioning lights, or irregular washing performance. Installation requires disconnecting power and replacing the harness inside the machine.

HARNS-WIRE

$68.99

Fix Number: FIX16875652
Manufacturer Part Number: W11643701

This lower wire harness connects key electrical components inside a top-load washer, including the motor, drain pump, and actuator, to the main control board. When the harness is damaged or worn, the washer may fail to start, not wash correctly, or experience intermittent operation. Replacing the harness helps restore proper communication between components and overall washer performance. Installation typically involves disconnecting power and water, accessing the lower portion of the washer, and reconnecting the wiring harness in place.

Motor Harness

$37.49

Fix Number: FIX3530254
Manufacturer Part Number: 6877ER3003B

Terminal Block

$17.44

Fix Number: FIX4211953
Manufacturer Part Number: DC65-00013A

HARNS-WIRE

$24.00

Fix Number: FIX16218050
Manufacturer Part Number: W11458657

Wire Harness

$70.05

Fix Number: FIX16730787
Manufacturer Part Number: W11590868

This wire harness is an electrical assembly designed to connect internal components and allow power and signals to flow properly. It is commonly replaced when wiring is damaged or causes intermittent operation. Appliance compatibility should be verified prior to service.

HARNESS,MULTI – Part Number: 6877ER1016M

Fix Number: FIX7785724
Manufacturer Part Number: 6877ER1016M

Washer Wire Plugs and Connectors

Popular Washer Wire Plugs and Connectors

Washer Wire Plug or Connector Brands

Washer Wire Plugs and Connectors

Start With Your Model Number

Popular Washer Wire Plugs and Connectors

Washer Wire Plug or Connector Brands