OEM Bosch Washer Parts | Expert DIY Repair Help & Fast Shipping

$60.10

Washer Door Boot Gasket

Fix Number FIX11732288

Manufacturer Part Number 00772658

This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks.

Fixes these symptoms

Leaking
See more...

$11.43

Leveling Leg

Fix Number FIX8727257

Manufacturer Part Number 00610643

Sold individually.

$70.28

CARBON-BRUSH

Fix Number FIX8696040

Manufacturer Part Number 00154740

$51.56

Cold Water Inlet Valve

Fix Number FIX8713229

Manufacturer Part Number 00422244

Fixes these symptoms

Leaking
See more...

Installation Instructions

gary from GOLD HILL, NC

Showed an E2 code which could mean door lock problem

or wiring connector (but) if I opened and shut the door the code went off and the unit went into Max spin and completed the cycle which emptied the remaining water out of the tub and the clothes!!!! Unplug the washer. Turn the H/C water valves off at the wall. Place a bucket up to the back of the unit. A pair of channel locks will help remove the H/C lines from the unit. Let the hose flow into the bucket. 2 star screws upper? L/R corners of the top, remove. Top slides back, lift up and take off. The cold in let will have 2 sm hoses with clamps. Squeeze the clamps together with your pliers and slide back on the hoses and pull the hoses off the nipples. The wiring connector has a small tab u push and it disconnects from the unit. The inlet valves have a tab to the side of the hose connector that u pry up with your screwdriver to unlock it so u can push the inlet free and pull out into to drum area. ( Reverse all of this and your good to go.) Hot outlet, same deal!! Easy job, $50 & 1hr fix even if you aren't a tech!!!! Read more...

$13.94

FOOT

Fix Number FIX12712379

Manufacturer Part Number 00637399

$63.02

VALVE-MAGNET

Fix Number FIX8714285

Manufacturer Part Number 00428210

$37.07

Door Hinge

Fix Number FIX8731238

Manufacturer Part Number 00651004

Sold individually.

Fixes these symptoms

Lid or door won’t close
See more...

Installation Instructions

Tammy from Rochester, MN

washing machine hinge broke

Ordered part. Unscrewed 6 screws to take door and hinge off. Replaced hinge with new hinge and screwed in 6 screws. Roughly a 10 minute job. Read more...

$12.51

FASTENING RING

Fix Number FIX8733231

Manufacturer Part Number 00670743

This part has a spring to tighten and goes in front of the bellow.

$44.50

Hot Water Inlet Valve

Fix Number FIX8713230

Manufacturer Part Number 00422245

Fixes these symptoms

Leaking
See more...

Installation Instructions

gary from GOLD HILL, NC

Showed an E2 code which could mean door lock problem

or wiring connector (but) if I opened and shut the door the code went off and the unit went into Max spin and completed the cycle which emptied the remaining water out of the tub and the clothes!!!! Unplug the washer. Turn the H/C water valves off at the wall. Place a bucket up to the back of the unit. A pair of channel locks will help remove the H/C lines from the unit. Let the hose flow into the bucket. 2 star screws upper? L/R corners of the top, remove. Top slides back, lift up and take off. The cold in let will have 2 sm hoses with clamps. Squeeze the clamps together with your pliers and slide back on the hoses and pull the hoses off the nipples. The wiring connector has a small tab u push and it disconnects from the unit. The inlet valves have a tab to the side of the hose connector that u pry up with your screwdriver to unlock it so u can push the inlet free and pull out into to drum area. ( Reverse all of this and your good to go.) Hot outlet, same deal!! Easy job, $50 & 1hr fix even if you aren't a tech!!!! Read more...