Whirlpool Washer Dryer Combo Springs and Shock Absorbers

Whirlpool Appliance Parts
Shop By Part Type

Popular Whirlpool Washer Dryer Combo Springs and Shock Absorbers

In Stock
Suspension Spring
Fix Number FIX11743345
Manufacturer Part Number WP63907
This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. This part is approximately 2 inches in length when compressed, made of durable metal, and is sold individually. For this repair, you will need a 1/4 nut driver, putty knife, flat blade screwdriver, and a pair of needle-nose pliers. Before you begin, disconnect the power, fill hoses, and drain hose to give you easy and safe access (drain hose may release some water, have a small container or towel near by). Your appliance contains 3 suspension springs, so keep this in mind if you need to order multiple of this part. We suggest you purchase several at a time, as they can be very useful to have on-hand.
Fixes these symptoms
In Stock
Tub Spring
Fix Number FIX11751118
Manufacturer Part Number WPW10250667
This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.
Fixes these symptoms
In Stock
Shock Absorber
Fix Number FIX11723173
Manufacturer Part Number W10822553
Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers. Shock absorber absorbs the vibrations and movements of the outer washer tub. Unplug the washer before installing this part. Wear work gloves to protect your hands.
In Stock
Tub Wear Pads - Package of 3
Fix Number FIX334620
Manufacturer Part Number 285744
This package of pads contains three tub wear pads.
In Stock
Leveling Spring
Fix Number FIX394983
Manufacturer Part Number 8316845
This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.
Fixes these symptoms
In Stock
Suspension Pads - Package of 3
Fix Number FIX334456
Manufacturer Part Number 285219
This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.
In Stock
Fix Number FIX11754856
Manufacturer Part Number WPW10446781
Fixes these symptoms
In Stock
Fix Number FIX993023
Manufacturer Part Number 280159
This is a kit of 2.
In Stock
Suspension Spring - Kit of 3
Fix Number FIX2338892
Manufacturer Part Number W10207783
This kit does NOT come with screws or bolts. Must use originals.
In Stock
Spring, Lint Screen Door
Fix Number FIX11741474
Manufacturer Part Number WP3394986

Related Parts