Washer Dryer Combo Latches

Door Catch Kit

★★★★★

★★★★★

10 Reviews

This kit includes two door strikes, and three door catches, to service doors that have one or two catches. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep the dryer door shut while in operation. If your appliances lid will not close, or it will not start, it may be time to replace the door catch. If this part is malfunctioning, it should be replaced immediately, as it is not safe to run a dryer with the door not properly closed. This kit also comes with a set of instructions to help with the repair.

Door Strike

★★★★★

★★★★★

1 Review

Located on the door of front load washing machines, the Door Strike ensures that the door will lock by activating the switch, which in turn allows the appliance to run properly. If your washer door will not open or close, is leaking, or the machine will not start or spin, your door strike may be damaged and should be replaced. Regular wear and tear, or a misaligned door may cause the piece to break. This is an easy repair and requires a Phillips screwdriver. This genuine OEM part is made of white plastic, approximately 2 inches in length, and is held in place by 2 screws on the inside of the door. Simply unscrew and remove the old part, line up the placement of the new part using the notch, and tighten the screws back into place.

Magnetic Door Plunger

★★★★★

★★★★★

2 Reviews

The magnetic door plunger is used on your washing machine to keep the door open when not in use. This allows for the inner door and tub seal to dry thoroughly, which helps to prevent any buildup of mold or mildew. If your washer door is not closing properly, the magnetic door plunger may be damaged and needs to be replaced. This genuine OEM part includes the plastic housing and a spring. To install the part, you just need to line up the tabs on the plunger with the slots on the inner door panel and snap it into place.

Door Catch

Door Catch This door catch is an authentic OEM replacement part for your dryer. This part holds the door strike and ensures that the door stays closed while your dryer is running. This prevents hot air or laundry from escaping from the dryer. If your dryer will not start or the door will not stay closed, you may need to replace the door catch. Please be sure to disconnect the power supply to your dryer before beginning this repair.

Door Strike/Hook Used to help make the door stay closed. Sold individually.

Door Latch This part helps to keep the door closed while the machine is running.

Door Lock Assembly The door lock assembly is a genuine OEM part for your washing machine. This part informs the washer that the door is closed and locked in place, which allows the machine to start its cycle. If you are not able to open or close the door, or the washer will not start, the door lock assembly may need to be replaced. This can happen if the switch has shorted out, which will prevent the latch from locking. Before beginning this repair, please be sure to disconnect the power supply to your washer. You will need a Phillips screwdriver in order to replace this part.

Door Catch This white female door catch is attached to the dryer door.

Dryer Door Catch The door catch is used in dryer