Shop OEM Washer Dryer Combo Drawers and Glides

Front Glide Kit

$13.07

Fix Number: FIX1804752
Manufacturer Part Number: 306508

This part is located on the front bulkhead of the dryer and helps the drum to rotate smoothly and quietly. If you notice a screeching or metal-on-metal noise while your appliance is operating, you may need to replace the front glides. This genuine OEM front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. We recommend replacing both sets of glides at the same time, which will require the purchase of two kits. To complete this repair, you will need a Philips screwdriver and a 5/16 nut-driver to remove the front panel and the bulkhead of the dryer, a drill with a 1/8-inch bit to remove the old rivets, and a rivet tool to install the new ones. Please ensure that you disconnect the power supply to your dryer before beginning this repair. While you have the appliance opened, we recommend vacuuming out any lint and debris, and inspecting the felt around the bulkhead and replacing if necessary.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

DRAWER ASSEMBLY

$76.34

★★★★★

1 Review

Fix Number: FIX12585054
Manufacturer Part Number: 5304514792

This drawer holds detergent, bleach, and fabric softener and releases them at the right time during the wash. If your washer isn’t cleaning well or the drawer is damaged, this part can help. It’s easy to install and weighs about 2 lbs. Just check your washer’s specs to make sure it fits.

Fixes these symptoms

Leaking
See more...

DRAWER

$71.11

Fix Number: FIX16620105
Manufacturer Part Number: W11524105

Fixes these symptoms

Leaking
See more...

DRAWER

$60.49

Fix Number: FIX3497587
Manufacturer Part Number: W10395619

This washer dispenser drawer replaces damaged or malfunctioning units that may leak, stick, or fail to dispense properly. It includes compartments for detergent, fabric softener, and bleach, and ensures correct timing during the wash cycle. Installation requires basic tools and checking model compatibility beforehand.