Refrigerator Hinges

Shop By Brand

Popular Refrigerator Hinges

$5.36
  In Stock
Lower Door Closing Cam
Fix Number FIX11739042
Manufacturer Part Number WP2182179
The lower door closing cam raises the door to keep it from touching the refrigerator liner when the door is closed. It fits both the left and right side of the refrigerator door. The most common reasons for replacing this part are the fridge door slips down when opened, the door does not open smoothly, or does not close by itself. This original part is made of durable black plastic, is approximately 1.1 inches by 1.5 inches, and is sold individually. To effectively install this part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, disconnect the power and the water supply. We suggest lubricating this part before installing. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams and put the door back on the lower hinge support. Replace the top hinge support and that completes the repair.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
$5.36
  In Stock
Door Cam - Black
★★★★★
★★★★★
(1)
Fix Number FIX11752991
Manufacturer Part Number WPW10329686
This is a refrigerator or freezer lower door closing cam. This part includes the door cam only, but you will need a new mounting screw to complete this repair, and it is sold separately. Door cams are mounted around the door pivot point and are designed to help close the refrigerator doors and keep them securely aligned in the correct position. For this repair you will need a 5/6 nut driver, a 5/16 socket, and a ratchet. We suggest lubricating the cam during installation to help it move smoothly.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
$15.08
  On Order
Upper or Lower Mullion Hinge Pin
Fix Number FIX2358752
Manufacturer Part Number 241779401
Sold individually.
Fixes these symptoms
$15.80
  In Stock
Hinge Bearing
Fix Number FIX976452
Manufacturer Part Number 240328203
Sold individually.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
$5.52
  In Stock
CAM-DOOR
Fix Number FIX11755285
Manufacturer Part Number WPW10470155
Fixes these symptoms
$6.23
  In Stock
Hinge Bearing
Fix Number FIX11770608
Manufacturer Part Number 5304507146
This is a replacement hinge bearing for your refrigerator. The hinge bearing is found on the door hinge, and reduces friction when the door opens and closes. If the bearing is damaged, you may not be able to open or close the door properly, and in this case, it will need to be replaced. It is made of white plastic and is approximately 2 inches long and 1 inch in diameter. This part is sold individually and is a genuine OEM part.
Fixes these symptoms
$12.83
  In Stock
Hinge Bearing
Fix Number FIX429803
Manufacturer Part Number 240328201
Sold individually. Also known as a short door closing cam.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
$5.52
  In Stock
Hinge Bracket
Fix Number FIX11739061
Manufacturer Part Number WP2183805
This part is used to support the hinge.
Fixes these symptoms
$20.73
  In Stock
Door Closing Cam Kit
Fix Number FIX358690
Manufacturer Part Number 4318165
This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
Closer Plate
Fix Number FIX976594
Manufacturer Part Number 240457702
This is the door closer plate or closure cam for your refrigerator. If your refrigerator door is hard to open or close, does not seal well, or there is a popping sound when opening the door, you will need to replace the door closer plate. You can find the closer plate at the bottom of the door, and you will need to remove the door to replace it. With the door off, simply unscrew the retaining screw for the old closer plate, remove the plate itself and then re-tighten the retaining screw. Re-install the door and your repair is complete.

Brands