Refrigerator Door Shelves

★★★★★

★★★★★

1 Review

Fix Number

FIX12364199

Manufacturer Part Number

242126602

This clear plastic refrigerator door shelf bin is located on the inside of the door. It is used to hold and organize items, such as jars and cans. Over time the shelf may crack, break, scratch or discolor, and will need to be replaced. This is a very easy repair and does not require any tools. Simply snap it into place in the slots on the door. This part is sold as a single part, is sourced directly from the manufacturer and is compatible with multiple types of side-by-side refrigerator models.

★★★★★

★★★★★

1 Review

Fix Number

FIX734935

Manufacturer Part Number

240534901

This is a genuine door shelf retaining bar for a refrigerator. It attaches to the inside of the door on the refrigerator and helps to secure items placed on the shelf. It is made of white plastic and can be easily installed without the use of tools. Start by making sure the projection on the inner door panel fits into the recessed area at the top of the shelf retainer bar. Once they are lined up, press it into place until you hear a snap. This part measures approximately 25-inches wide, 3-inches high, and 5-inches deep. If it breaks, cracks or warps over time, it will need to be replaced. This part is sold as an individual part. We recommend taking this opportunity to inspect the other shelf retaining bars for damage in case they also need to be replaced at the same time.

★★★★★

★★★★★

5 Reviews

Fix Number

FIX429868

Manufacturer Part Number

240337901

If the middle shelf on your refrigerator door is damaged, this is the OEM replacement part needed. Door shelves are great for organizing items in your appliance such as jars, containers, and condiments, and if broken can prevent the door from properly opening and closing. This white, plastic door shelf has open square larches and measures roughly 24-1/4 inches wide and 3-3/4 inches deep. This low effort repair requires very little time and zero tools. Fasten it directly to the door by sliding it in place, and your repair is complete.

★★★★★

★★★★★

1 Review

Fix Number

FIX12578777

Manufacturer Part Number

W11239961

Fix Number

FIX429668

Manufacturer Part Number

240311502

The genuine OEM part is an end cap for the retainer bar used with the shelving on your fridge and freezer doors. These parts are sold individually, and this part is specifically for the right-side of the retainer bar. Replacing a broken end cap is a simple repair and may require the use of a flat blade screwdriver in order to pop open the locking tabs. Remove the entire shelf assembly from your fridge and pop off the broken end cap. Line up the new part and snap it into place on the retaining bar. Install the newly repaired assembly back into your appliance and you are all done.

Fix Number

FIX429667

Manufacturer Part Number

240311501

The retainer bars on your fridge and freezer door help to keep jars and containers from falling off the shelves when the doors are opened. If part of it become damaged, it should be replaced in order to keep your food items secured. This genuine OEM part is an end cap for the left-hand side of the retainer bar. Replacing this part is a simple repair and may require the use of a flat blade screwdriver. To replace this part, remove the entire retainer bar from the door, use the screwdriver to pop off the damaged end cap, and insert the new one ensuring that the tabs are locked in place.

Fix Number

FIX429820

Manufacturer Part Number

240331401

The retainer bar is used to keep bottles and jars securely on your refrigerator door shelves. This genuine OEM replacement bar is cut to fit your fridge and the existing end caps. Please note that this part is just the retainer bar, if you also need to replace the end caps they will need to be purchased separately. Replacing the bar on your fridge is a simple repair and may require the use of a flat blade screwdriver to gently pry open the clips for the end caps. Remove the shelf assembly from the fridge door by lifting at the end caps. Remove the end caps from the damaged retainer bar and slide them onto the new bar ensuring the locking tabs click into place. If the end caps are difficult to remove, or to slide onto the new bar, you may need to use the flat blade screwdriver to lift up the tabs. The new bar can now be installed back into your fridge.

Fix Number

FIX422444

Manufacturer Part Number

215267701

This part includes one refrigerator door shelf end cap, which is compatible with either the left or right side. This durable white plastic part is sourced directly from the original manufacturer and is used to hold the door bin on the refrigerator door. To remove it you will need to remove that end of the shelf by pressing upwards or downwards on it. Once it is removed you should be able to just pull the end cap off by hand. Place the new end cap on by aligning it with the locking tabs on the rail and snapping it into place. Then you will snap it into the opening on the shelf of the fridge.

Fix Number

FIX422925

Manufacturer Part Number

215473602

It can be used for either the right side or the left side of some refrigerator door shelves.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX6011779

Manufacturer Part Number

WR71X11044

Clear plastic gallon refrigerator door bin. It is used for storing fresh food and it is the right hand side.