Range Legs and Feet

Grate Foot Sourced directly from the manufacturer, this OEM replacement grate foot is for ranges and cooktops. The grate foot attaches to the bottom of the burner grate to prevent the cooktop from being scratched. It also protects the stove top by cushioning the grate on your range and making it level. Over time, these feet may crack or deteriorate and will need to be replaced at that time. This part is made out of durable black rubber, has a diameter of approximately 0.25 inches, and is sold individually. Depending on your model, you may need multiple to complete the replacement.

Burner Grate Foot This is a single burner grate foot for ranges. It is sourced directly from the manufacturer and designed to help prevent the burner grate from scraping the top. Before performing this repair give the surface time to cool off.

Grate Pads - Set of 4 Also known as grate feet.

Burner Grate Pads - Kit of 5

★★★★★

★★★★★

1 Review

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Leveling Leg This part includes one range leveling leg, sourced directly from the original manufacturer. The leveling leg is what supports the range and ensures it is sitting level, stable, and at the proper height. If your range has suddenly become wobbly, we suggest checking the leveling legs for damage. For this simple repair, you may need a pair of slip-joint pliers. Tilt the range forward enough so that you can tilt it back and place wood blocked under the front to keep it propped up (making sure it is stable). Unscrew the old leveling leg by hand, or with your pliers if it is broken and hard to remove. Place the new leg into the opening and screw it into place, be careful not to cross-thread it. Place it at about the same distance that the original one was in. Set the range back down on the floor and continue to level it with your pliers. Once the block has been removed, make sure it is sitting flat on the floor and adjust as needed.

Grate Feet - Kit of 4 This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted with a specific fire-resistant adhesive. If necessary, be sure to order adhesive separately. Be sure your burners are off and have cooled down to the touch before replacing these parts.

LEG LEVELER

Rear Leveling Leg Sold individually.

Leveling Leg

★★★★★

★★★★★

1 Review

Sold Individually.

Grate Foot Kit

★★★★★

★★★★★

1 Review

This kit includes 8 rubber feet and adhesive. This surface burner grate pad set is for ranges. Surface burner grate pad set contains the four pads that attach to the bottom of the burner grate to prevent the cooktop from being scratched.