Dryer Pumps

★★★★★

★★★★★

4 Reviews

Fix Number

FIX3579318

Manufacturer Part Number

4681EA2001T

This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it can cause the washer to not drain properly. Keep in mind that the pump casing is sold separately. This repair is rated medium-difficulty and can vary depending on the model. For this repair you will need a Philips screwdriver, a small flat blade screwdriver, needle nose pliers, and slip joint pliers. Do not forget to disconnect the power before you begin this repair. In general, this repair can be started by removing the top of the washer followed by the front panel. Moving down the front of the appliance, remove the door, latch, tub gasket, and drainer cover. The drain hoses and clip will need to be disconnected from under the drain assembly. To install the new pump motor, reassemble parts in the reverse order. We recommend taking photos while disassembling and keeping screws and parts neatly organized.

Fix Number

FIX7783938

Manufacturer Part Number

137221600

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

Fix Number

FIX3522306

Manufacturer Part Number

383EER2001A

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Fix Number

FIX3501453

Manufacturer Part Number

WH23X10040

This durable drain pump is designed to efficiently remove water from the washer tub during drain and spin cycles, ensuring smooth operation and preventing water buildup. Made from high-quality ABS plastic for impact and corrosion resistance, it provides long-lasting reliability. Common signs that your pump may need replacement include slow or incomplete draining, water pooling around the machine, or error codes related to drainage. The pump is typically located at the bottom of the washer for easy access. Installation is simple—always disconnect power, remove the old pump, and secure the new one in place.

Fix Number

FIX8770262

Manufacturer Part Number

00145623

This drain pump helps remove water from the condenser area in your dryer, supporting efficient drying. It’s a genuine OEM part made for select Bosch, Thermador, and Gaggenau models. If your dryer isn’t draining or drying well, replacing the pump may restore performance. Always disconnect power before installation and confirm compatibility with your model.

Fix Number

FIX16620382

Manufacturer Part Number

W11551760

The dryer drain pump helps remove excess condensate water, preventing moisture buildup and ensuring efficient drying. A faulty pump can lead to damp clothes or drainage issues, making replacement necessary. This genuine OEM part restores functionality and is designed for select dryer models. Unplug the appliance before installation for safety.

Fix Number

FIX16878251

Manufacturer Part Number

AHA75853813

This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operation. Replacing a failing pump can resolve drainage issues or abnormal noise.

Fix Number

FIX16620187

Manufacturer Part Number

W11539855

This drain pump removes water from the ice maker’s reservoir to prevent leaks and keep the appliance running smoothly. It’s a durable, easy-to-install replacement for faulty pumps and is compatible with select refrigerator and ice maker models. Replace it if you notice water pooling or reduced ice production.

Fix Number

FIX16543501

Manufacturer Part Number

W11516811

This OEM drain pump removes moisture from the dryer drum and directs it to the drain hose, helping prevent clogs and maintain drying efficiency. It’s built for durability and reliable performance. Replacing a worn or faulty pump can resolve issues like poor drying or water buildup. Always confirm compatibility before purchasing.

Fix Number

FIX11765857

Manufacturer Part Number

W10903190

Drainage problems in washers or ventless dryers are often caused by a faulty pump. This replacement part removes water during the cycle and helps prevent flooding or standing water. It’s reliable, easy to install with safety precautions, and fits securely in compatible systems. Be sure to confirm your model number before purchasing.