OEM Midea Dryer Parts

Cover Switch

$9.79

Fix Number: FIX18188580
Manufacturer Part Number: 17438200000344

Safe dryer operation depends on a working cover switch. A worn switch may keep the cycle from starting or cause it to stop without warning. First make sure the door closes fully and nothing blocks the switch area. Check nearby wiring before ordering a replacement. Confirm fit with the complete dryer model number. Disconnect electrical power before service, and shut off the gas supply when working on a gas dryer. Ask a technician for help if the switch is difficult to reach.

Fixed Seat

$10.88

Fix Number: FIX18161385
Manufacturer Part Number: 12138200000320

A dryer door that will not stay shut may need a new fixed seat. Located near the door opening, the seat supports the catch and helps hold the door closed during use. Damage or wear can cause loose latching, poor door alignment, or cycles that will not begin. Installation may involve releasing retaining tabs and pressing the replacement into the opening, but the exact steps can differ by appliance. Check the service diagram before removing the old piece. Make sure the shape and connection points match. Unplug the appliance before starting, and test that the door opens and closes smoothly after installation.

Fixes these symptoms

Door won’t close
See more...

Pcb

$50.36

Fix Number: FIX18184187
Manufacturer Part Number: 17138200003662

Filter Lint Assembly

$17.44

Fix Number: FIX18161418
Manufacturer Part Number: 12138200004350

Thermostat

$6.51

Fix Number: FIX18187605
Manufacturer Part Number: 17400513000461

When a dryer overheats or will not heat, the thermal safety parts should be checked. This limiter watches the dryers temperature and cuts power during an unsafe condition. A blocked vent, weak airflow, or faulty thermostat may cause the problem. Fix the cause before installing a new limiter. Match the part to the full appliance model. Disconnect electrical power and close the gas valve, if present. Never bypass the limiter, and test the dryer carefully after the repair.

Printed Control Board

$55.18

Fix Number: FIX18184186
Manufacturer Part Number: 17138200003651

A dryer that acts without warning may have a problem with its main control board. This electronic board helps manage cycle length, drum movement, heating, and sensor readings. It also processes the settings chosen on the control panel. Replacement may be needed if the controls stop responding, cycles end early, or the appliance will not operate after other causes have been checked. Inspect the wiring, power supply, fuses, sensors, and switches before deciding the board has failed. Disconnect electrical power before service. Take a clear photo of the wire connections, avoid touching the metal contacts, and follow the appliance diagram during installation.

Drive Motor

$91.72

Fix Number: FIX18151224
Manufacturer Part Number: 11002012025802

Thermostat

$14.16

Fix Number: FIX18187604
Manufacturer Part Number: 17400513000460

A dryer that will not heat or stops without warning may have a faulty thermostat. This small safety device responds to rising temperature and helps prevent the heating system from running under unsafe conditions. Before replacing it, inspect the vent for lint buildup and check the heater, thermal fuse, wiring, and temperature sensor. Poor airflow can cause overheating and may damage a new thermostat if the blockage remains. Disconnect electrical power before service, and shut off the gas supply on gas-powered equipment. Label the wires before removing them, avoid bending the terminals, and install the replacement in the same position shown in the appliance diagram.

Fixes these symptoms

Not Heating
See more...

Temperature Sensor

$7.60

Fix Number: FIX18188581
Manufacturer Part Number: 17438200000404

Clothes that stay damp or become too hot may point to a faulty dryer temperature sensor. The sensor measures heat inside the airflow path and reports changes to the main control board. Accurate readings help the dryer control the heater and maintain a suitable temperature through each cycle. Before replacing the sensor, check for blocked vents, loose wires, a blown thermal fuse, or other heating problems. A multimeter and the service chart may be needed for proper testing. Disconnect electrical power before opening the cabinet, and close the gas valve on gas-powered units. Reconnect every wire firmly and follow the appliance diagram during installation.

Fixes these symptoms

Not Heating
See more...

Flame Switch

$84.95

Fix Number: FIX18188577
Manufacturer Part Number: 17438200000160

Midea Dryer Parts

Popular Midea Dryer Parts

Midea Dryer Appliance Types

Popular Midea Dryer Models

Midea Dryer Parts

Start With Your Model Number

Popular Midea Dryer Parts

Midea Dryer Appliance Types

Popular Midea Dryer Models