Dryer Handles and Latches

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11766033

Manufacturer Part Number

5304505088

This door latch, also known as a door strike, is designed to secure the washer door during operation, helping to prevent leaks and ensure the appliance starts correctly. Made from brushed metal, it features two mounting holes for easy installation with standard screws. If your washing machine door doesn’t close fully or the cycle won’t begin, a worn or damaged latch may be the cause. Replacing it is simple—just remove the old latch by unthreading the screws and install the new one using the existing hardware. Please note that this OEM replacement part is sold individually and does not include mounting screws or additional accessories.

Fix Number

FIX12745673

Manufacturer Part Number

W11429587

If your dryer door keeps popping open or won’t latch, this door catch might be the fix you need. It’s a small part, but it plays a big role in keeping your dryer running smoothly. Just swap out the old catch for this new one, and your door should stay securely shut during every cycle. It’s compatible with several models, so be sure to check yours before ordering.

Fix Number

FIX12365826

Manufacturer Part Number

5304514774

This door lock keeps your washer door securely closed during cycles, helping your machine run safely and smoothly. It’s made for select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. If your washer won’t start or stops mid-cycle, replacing the lock might fix the issue. Be sure to unplug your washer before installing and check your model for compatibility.

★★★★★

★★★★★

7 Reviews

Fix Number

FIX11731583

Manufacturer Part Number

W10861225

Sourced directly from the manufacturer, this OEM approved replacement handle is approximately 6 inches long, 2 inches wide, and is made of durable white plastic. This handle is used to open the dryer door. If your handle is missing, cracked, or damaged in anyway, it needs to be replaced. This is a common repair due to the constant use and the materials weakening over time. No tools are needed for installation, it simply snaps into place. Each Handle is sold individually.

★★★★★

★★★★★

11 Reviews

Fix Number

FIX334230

Manufacturer Part Number

279570

This kit includes two door strikes, and three door catches, to service doors that have one or two catches. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep the dryer door shut while in operation. If your appliances lid will not close, or it will not start, it may be time to replace the door catch. If this part is malfunctioning, it should be replaced immediately, as it is not safe to run a dryer with the door not properly closed. This kit also comes with a set of instructions to help with the repair.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12743305

Manufacturer Part Number

WE01X30378

This white plastic door handle is designed for use with dryers, offering a sturdy and reliable grip for opening and closing the appliance door. Measuring 9 inches in length and 2 inches in thickness, it attaches securely at both the top and bottom. If your current handle is damaged or missing, this replacement restores full functionality with a straightforward installation process. To install, gently pry off the left side of the old handle, remove it, then align and insert the prongs on the right side into the door until it clicks into place. This item is sold individually and does not include any additional components.

★★★★★

★★★★★

1 Review

Fix Number

FIX11748369

Manufacturer Part Number

WPW10111905

The door catch is a metal piece found on the inside dryer door, which helps to keep the door closed. If the catch is broken the door may not stay securely shut, which can result in the dryer not starting. The door catch would be considered the female part, and the door strike would be the male part (which is sold separately and not as a kit). Replacing the broken catch is an easy repair. Use a putty knife to pop out the top and bottom of the catch, then pull out the entire part from the door. Slide the new part into the opening, and firmly press to latch it into place. You are done! This is a genuine OEM part, which ensures it will be the proper fit for your appliance.

Fix Number

FIX418433

Manufacturer Part Number

131658800

This door catch is an authentic OEM replacement part for your dryer. This part holds the door strike and ensures that the door stays closed while your dryer is running. This prevents hot air or laundry from escaping from the dryer. If your dryer will not start or the door will not stay closed, you may need to replace the door catch. Please be sure to disconnect the power supply to your dryer before beginning this repair.

Fix Number

FIX3496878

Manufacturer Part Number

WH44X10288

The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a cycle or open your washer door. It is mostly black in color and made of plastic. This part measures approximately 3.75 by 3.5 inches.

Fix Number

FIX11766999

Manufacturer Part Number

WE01X25316

This gray door latch keeps the dryer door securely closed during operation and ensures the appliance won’t run unless latched properly. It’s part of the safety system and helps prevent accidents or interruptions. Replace the latch if the door won’t stay shut, the dryer won’t start, or the latch shows signs of damage.