OEM Estate Dryer Parts | Expert DIY Repair Help & Fast Shipping | Fix.com

Popular Estate Dryer Parts

$10.01
Thermal Fuse
(1)
Fix Number FIX11741460
Manufacturer Part Number WP3392519
This is an approved OEM replacment part for more than 150 models of Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, and Magic Chef Dryers and Washer-Dryer Combos. For complete compatiblity please see "Model Cross Reference List" below. The thermal fuse is a safety tool which attaches to the blower wheel housing and stops the flow of electricity if your dryer is overheating. The terminal size is 3/16". If your fuse is faulty your dryer will not start or heat properly. This part is a one-time use fuse and cannot be re-set. It must be replaced if there is no longer continuity between the pins. When making this repair we recommend checking all vents for buildup as clogged dryer vents can cause the fuse to blow. Fuses are sold individually.
Fixes these symptoms
Heat stays on after drum has stopped
No heat or not enough heat
Shuts off too soon

See more...
Installation Instructions
gary from apex, NC says,

dryer not heating
Checked the heating element and found a break in the heating coil. Decided to change the thermal fuse and the the cycling thermostat because of the age of the dryer....read more

$15.88
Multi Rib Belt - 92-1/4"
(1)
Fix Number FIX346995
Manufacturer Part Number 341241
This Multi Rib Belt is an OEM approved replacement part for Whirlpool, Kenmore, KitchenAid, Norge, Roper, Maytag, Magic Chef, Crosley, Admiral, Estate, Amana, Inglis, Jenn-Air, and Hoover Dryers. To ensure this is compatible with your appliance, please see the "Model Cross Reference List" below. The Multi Rib Belt attaches to the motor pulley and is responsible for spinning the drum. If you can hear the motor running, but the drum does not turn, it is likely that the belt is broken. Other symptoms of a broken Multi Rib Belt include unusual noises, failing to start, no heat, burning smell, and an unresponsive touchpad. This belt is 1/4" wide, has a length of 92-1/4", and has four ridges and three groves on the belt. Each belt is sold separately, and may also be called a Dryer Drum Belt, or a Multi-V Belt.
Fixes these symptoms
Heat stays on after drum has stopped
No heat or not enough heat
Noisy

See more...
Installation Instructions
carolyn from phila, PA says,

not spinning
follow the vidio...read more

$23.44
M Series New Style Coil Kit
Fix Number FIX334310
Manufacturer Part Number 279834
Sourced directly from Whirlpool, this kit is designed to fit a variety of Dryers and Washer-Dryer Combos manufactured by Whirlpool, Kenmore, Maytag, Speed Queen, Amana, KitchenAid, Norge, Roper, Crosley, Magic Chef, Admiral, Estate, Inglis, Jenn-Air, Hoover, and International. For full compatibility, please see the "Model Cross Reference List" below. This kit comes with two ignition coils (one three-terminal boost/hold coil, and one two-terminal secondary coil). Usually only one of them burns out, but you should replace them as a set as both have to be operational for the gas valve to open. The primary purpose of the part is to open the gas valve while the dryer is running. This part fixes the following symptoms: No heat or not enough heat, Takes too long to dry, Shuts off too soon, and the Timer not advancing. To test your current parts, watch the burner, and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad. This part may also be called a Gas Valve Solenoid, and kits are sold individually.
Fixes these symptoms
No heat or not enough heat
Noisy
Shuts off too soon

See more...
Installation Instructions
John from Warrington, PA says,

Dryer did not stay hot
To avoid the mistake I made, make sure you pop the small, square white plug towards the bottom left on the front of the dryer. This gives you a view into the heater so you can see if the igniter and ...read more

$5.04
Door Catch Kit
(1)
Fix Number FIX334230
Manufacturer Part Number 279570
This OEM replacement Door Catch Kit was designed for specific models of Dryers, Washer Dryer Combos, Dishwashers, Laundry Accessories, and Trash Compactors manufactured by Kenmore, Whirlpool, KitchenAid, Roper, Estate, Crosley, Inglis, Maytag, Admiral, and Magic Chef. To ensure this part will fit your appliance, please see the "Model Cross Reference List" below. The Door Catch's purpose is to hold the door strike to keep the door closed while in operation. If your appliance lid will not close, or it will not start, it may be time to replace the Door Catch. This Kit is made up of plastic and metal components, it includes two Door Strikes, and three Door Catches to service doors that have one or two catches. Each Kit is sold individually.
Fixes these symptoms
Door won’t close
Lid or door won’t close
No heat or not enough heat

See more...
Installation Instructions
Kathryn from Endwell, NY says,

Dryer Door Popped Open
After watching the instructional video, I removed the male portion of the door catch with pliers and replaced them with the new parts. It only took a few minutes. I didn't need to replace the female...read more

$22.88
Thermostat, Internal-Bias
(3)
Fix Number FIX11741405
Manufacturer Part Number WP3387134
This thermostat is an OEM replacement part for various Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, Estate, Amana, Inglis, Admiral, Magic Chef, and Jenn-Air Dryers and Washer-Dryer combos. For full compatibility, please see the "Model Cross Reference List" below. Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. The cycling thermostat regulates and monitors the temperature inside the dryer. This particular cycling thermostat will turn the heating element off once the temperature reaches 155F and cycle back on once the internal temperature drops by 25F. Thermostats are sold individually. This part fixes the following symptoms: No heat or not enough heat, Takes too long to dry, Will Not Start, and Timer will not advance.
Fixes these symptoms
No heat or not enough heat
Shuts off too soon
Takes too long to dry

See more...
Installation Instructions
gary from apex, NC says,

dryer not heating
Checked the heating element and found a break in the heating coil. Decided to change the thermal fuse and the the cycling thermostat because of the age of the dryer....read more

$21.24
Rear Drum Support Roller Kit
Fix Number FIX347627
Manufacturer Part Number 349241T
This is a rear drum support roller kit for your dryer. The 2 rollers come with 4 tri-rings, and 1 palnut. We recommend that you replace both rollers at once. This kit stabilizes the drum cylinder, allowing the dryer to tumble properly. If you are having problems with your appliance during tumble mode, or if it is too noisy, you will need this kit.
Fixes these symptoms
Marks left on clothes
Noisy
Will Not Start

See more...
Installation Instructions
Tyrik from KENNESAW, GA says,

The roller support wheels were worn down and needed replacing.
Step 1: removed power source.
Step 2: removed screws from lent catcher.
Step 3: removed top lid.
Step 4: removed front panel.
Step 5: removed drum.
Step 6: removed plastic wa...read more

$42.05
Maintenance Kit
Fix Number FIX373087
Manufacturer Part Number 4392065
This consists of a belt, two roller wheels and an idler pulley.
Fixes these symptoms
Marks left on clothes
No heat or not enough heat
Noisy

See more...
Installation Instructions
Steve from South Lake Tahoe, CA says,

Defective heater element dryer still runs.
Expect to spend a lot of time on your knees. Unplug appliance. Remove dryer hose. remove back cover 4-6 7mm bolts. Unplug dryer heater element connections 2 blade or pin connectors. Unbolt element co...read more

$4.74
Leveling Foot
Fix Number FIX1609293
Manufacturer Part Number 49621
Sold individually.
Fixes these symptoms
Noisy


Installation Instructions
michael from Tampa, FL says,

Dryer had a very loud squealing sound
Remove 2 screws in the lint catcher push in on the clips in the front corners with a slim screwdriver to flip the top up then remove the two 5/16th bolts on either side to release the front of the dry...read more

$61.46
Heating Element - 240V 5400W
Fix Number FIX334313
Manufacturer Part Number 279838
Sourced directly from Whirlpool, this Heating Element is an OEM approved replacement part for a variety of Dryers manufactured by Whirlpool, Kenmore, Roper, Estate, Crosley, KitchenAid, Maytag, Inglis, Amana, Admiral, and Magic Chef. For full compatibility, please see the "Model Cross Reference List" below. The Heating Element is the primary source of heat used to dry the clothes in your dryer. This heating element is strung with a coiled wire, and may need to be replaced if your dryer does not produce heat, if it produces too much heat, or if it won't turn on. If your dryer does not heat, first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element is defective. Heating Elements are sold individually.
Fixes these symptoms
Heat stays on after drum has stopped
No heat or not enough heat
Takes too long to dry

See more...
Installation Instructions
gary from apex, NC says,

dryer not heating
Checked the heating element and found a break in the heating coil. Decided to change the thermal fuse and the the cycling thermostat because of the age of the dryer....read more

$22.79
Door Switch - 3 Wire
(4)
Fix Number FIX11741701
Manufacturer Part Number WP3406107
This Door Switch is sourced directly from Whirlpool, and is compatible with more than 150 models of Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, and Magic Chef Dryers and Washer-Dryer Combos. For complete compatibility, please see "Model Cross Reference List" below. This switch also replaces the two wire switch that is on many models. The Door Switch is responsible for detecting when the dryer door is open to prevent the dryer from operating while the door is open. If your dryer will turn on but not start or continues working while the door is open, you may have a faulty Door Switch. Door Switches are sold individually.
Fixes these symptoms
Door won’t close
No heat or not enough heat
Shuts off too soon

See more...
Installation Instructions
David from Delmar, DE says,

dryer door switch didn't work
Very easy, whirlpool replaced the 2 wire switch with a 3 wire switch. After calling this site, and Whirlpool about the new 3 wire harness, they said it would work fine, which it did....read more

Popular Estate Dryer Models