Admiral Cooktop Parts

Admiral Appliance Parts
Shop By Appliance Type

Popular Admiral Cooktop Parts

$8.00
  In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(1)
Fix Number FIX11750107
Manufacturer Part Number WPW10196405
This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.
Fixes these symptoms
Installation Instructions
Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements. Read more...
$15.84
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(2)
Fix Number FIX2366565
Manufacturer Part Number W10196406RW
The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.
Fixes these symptoms
Installation Instructions
chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
$5.44
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(4)
Fix Number FIX11750108
Manufacturer Part Number WPW10196406
This chrome drip bowl is an OEM approved replacement part designed for use with various models of electric ranges and cooktops. This drip bowl fits under 6-inch burner elements and has a diameter of approximately 8 inches. It sits under the burner, keeping any drips and spill contained. It is common for this part to become discolored, corroded, or otherwise damaged with time, and will need to be replaced. Each drip bowl is sold individually, so this is a good time to check the other drip bowls on the appliance in case you would like to replace those as well (sold separately). No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. By routinely cleaning this part, it will help to prolong its life.
Fixes these symptoms
Installation Instructions
Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements. Read more...
$15.48
  In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(1)
Fix Number FIX1570190
Manufacturer Part Number 12001676
This surface burner receptacle kit is used in ranges and cooktops. The kit includes one plastic block, metal bracket, wires, and high temperature wire nuts. If the surface element works intermittently, the electrical contacts of the receptacle may be corroded. If your burner element is not heating, or your receptacle is burned out, then replacing this part will solve this problem. The tools needed for this repair are a Phillips screwdriver and wire strippers. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes these symptoms
Installation Instructions
Steven from Westerly, RI
Burner Receptacle replacement
unplugged stove, removed old burner, lift top (mine did not have retaining screws), cut old wires, unscrewed Receptacle, screwed in new Burner Receptacle, used the wire strippers to strip back the old wire, then used the wire tie to connect (very very easy). done! plugged back in the new burner element (old one was burnt up) and plugged the stove back in, complete! works great! My wife loves me again! :) Read more...
$64.03
  In Stock
Spark Module - Surface Burners
★★★★★
★★★★★
(1)
Fix Number FIX2003170
Manufacturer Part Number 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Olen from Macomb, IL
Stovetop ignitors not sparking
Removed top cover on the rear. Removed one Phillips-head screw holding igniter module in place. Removed the six wires from old module. Crimped new ends on the four wires going to the burners. Installed the wires on the new module and installed the new module in place with the one screw. Reinstalled the rear cover and tried the range. Worked perfect. Read more...
$13.00
  In Stock
Surface Burner Plug-In Block Kit
★★★★★
★★★★★
(3)
Fix Number FIX340571
Manufacturer Part Number 330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms
Installation Instructions
Doris from Skoke, IL
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else! Read more...
$37.48
  In Stock
Standard Y-Frame Range Surface Burner
Fix Number FIX11743366
Manufacturer Part Number WP660532
The manufacturer suggests replacing the receptacle at the same time.
Fixes these symptoms
Installation Instructions
Curtis from Jackson, MS
I needed new burners and drip bowls and I wanted a flat radiant cartridge
Very easy! I just replaced the drip bowls, took out old burners and put in new ones. I took out my grill, and replaced with the radiant flat cartridge. I just plugged it right in, and I was done! Read more...
$33.91
  In Stock
Grease Filter
Fix Number FIX11743846
Manufacturer Part Number WP707929
This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.
Fixes these symptoms
Installation Instructions
ron from lebanon, TN
replaced old filter
pulled old filter. installed new. Read more...
$52.13
  In Stock
Surface Element Switch
Fix Number FIX12070192
Manufacturer Part Number W10900107
Fixes these symptoms
Installation Instructions
Howard from Carrollton, TX
Needed to replace a faulty burner switch
Removed the old switch by unplugging the electric connectors to the switch, removed the palnut, and took the old switch out. Placed the new switch in, reconnected the electric connectors. Mounted the new bracket, trimmed the shaft to fit, tightened the new palnut, selected the new dial adapter that was suitable, put the old dial back on, and it was done! Very easy. Anyone can do it. Read more...
$51.36
  In Stock
Burner Head Cap with Spark Electrode
Fix Number FIX11741732
Manufacturer Part Number WP3412D024-09
This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Gas smell
  • See more...
Installation Instructions
MICHAEL from VALLEY STREAM, NY
Burner head rusted thru with gas leakage
removed electric clips(2) with pliers, cleaned them with sandpaper, slid onto new burner and tightened into place. Read more...

Appliance Type

Popular Admiral Cooktop Models