Part Location Diagram of 213673-2 Makita O Ring 52
See part 55 in the diagram
( Grid squares measure 1x1 inch )

O Ring 52 213673-2

Works With Model 9565PC!
$6.51
In Stock
Fix Number:
FIX10141984
Manufacturer #:
213673-2
Manufactured by:
Makita
Works With Model 9565PC!

Product Description

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • <u>Extrusion and Nibbling</u> • O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> • One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> • O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> • O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> • O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Model Compatibility

This part works with the following models:
Fix Number: FIX10141984
Manufacturer Part Number: 213673-2
Brand Model Number Description
Makita 9560CV Angle Grinder - Angle Grinder
Makita 9561CV Angle Grinder - Angle Grinder
Makita 9563CV Angle Grinder - Grinder
Makita 9564 Angle Grinder - Angle Grinder
Makita 9564CV Angle Grinder - Angle Grinder
Makita 9564CVL Angle Grinder - Angle Grinder
Makita 9564P Grinder - Grinder
Makita 9564PC Angle Grinder - 4-1/2" SJS Angle Grinder
Makita 9565 Angle Grinder - Angle Grinder
Makita 9565CV Angle Grinder - Angle Grinder
Makita 9565CVR Grinder - Grinder
Makita 9565PC Angle Grinder - 5" SJS Angle Grinder
Makita 9565PCV Grinder - Grinder
Makita 9566CV Angle Grinder - Cut Off Angle Grinder
Makita 9566PC Angle Grinder - 6" SJS Cutoff / Angle Grinder
Makita 9566PCV Sander Grinder - Makita 9566pcv-Type-2 Parts
Makita 9566PCX1 Grinder - Grinder
Makita LS1013FL Miter Saw - Compound Miter Saw
Makita LS1013L Miter Saw - Compound Miter Saw
Makita PW5001C Sander Polisher - Wet Stone Polisher
Makita SG1250 Saw - Saw