Carbon Brush 30711062001

This is a manufacturer sourced replacement part used on a Fein grinders/sanders. It includes one (1) carbon brush with lead wire attached. Carbon brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver and pliers to complete this job. • First remove screws holding the cover together • Separate two (2) halves of the housing to gain access to armature and brush holder • Remove the old brush • Install the new brush • Reassemble and test your tool