10188435-1-M-DeWALT-N110359-Bearing
Part Location Diagram of N110359 DeWALT Bearing
See part 33 in the diagram
10188435-1-S-DeWALT-N110359-Bearing 360 view
( Grid squares measure 1x1 inch )
10188435-1-S-DeWALT-N110359-Bearing 10188435-2-S-DeWALT-N110359-Bearing 10188435-3-S-DeWALT-N110359-Bearing 10188435-1-S-DeWALT-N110359-Bearing 360 view
Part Location Diagram of N110359 DeWALT Bearing

Bearing N110359

Works With Model DW625!
$6.51
In Stock
Fix Number:
FIX10188435
Manufacturer #:
N110359
Manufactured by:
DeWALT
Works With Model DW625!

Jump to:

Product Description

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

  • Works with the following brands:
    DeWALT, DeVilbiss, Porter Cable, Craftsman
  • Works with the following products:
    Angle Grinder, Hammer Drill, Grinder, Miter Saw
  • Part# N110359 replaces these:
    N110359, PN110359
Works with the following brands:
DeWALT, DeVilbiss, Porter Cable, Craftsman
Works with the following products
Angle Grinder, Hammer Drill, Grinder, Miter Saw
Part Number Cross Reference
Part# N110359 replaces these:
N110359, PN110359

Questions and Answers

Be the first to ask our experts a question about this part!

Carbon Brush
$9.98
In Stock
Part Number: FIX10181643
This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, worn brushes are the ...
Brush
$18.58
In Stock
Part Number: FIX10170261
This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wi...
Carbon Brush
$6.20
In Stock
Part Number: FIX16687899
This is a genuine Dewalt replacement part, it is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's e...
Blade Adapter Ring
★★★★★
★★★★★
(2)
$6.63
In Stock
Part Number: FIX10166690
This is an authentic adapter ring used to mount the saw blade to your miter saw. It is sold as an individual part. Standard 12-inch saw blades have a 1-inch arbor hole, while most miter saw arbors are 5/8 of an inch. Thi...
Miter Saw Ball Bearing
★★★★★
★★★★★
(1)
$16.20
In Stock
Part Number: FIX10188573
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, ...
Screw
$6.51
In Stock
Part Number: FIX10171664
This is a manufacturer-approved screw, used to secure the pivot plate on a miter saw. This screw is sold individually. If the pivot plate has become loose due to a damaged screw, or it has rusted or gone missing, it will...
Miter Saw Kerf Plate
$15.59
In Stock
Part Number: FIX10166116
This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to ...
Brush
$10.94
In Stock
Part Number: FIX10186732
This carbon brush is sourced from the original manufacturer and is used with compact routers. This part includes one carbon brush with the wire lead attached. The carbon brush is a general wear part that will require rep...
Brush pair
$14.43
In Stock
Part Number: FIX17060024
Bushing
$11.79
In Stock
Part Number: FIX10183438
This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbling, this is one of ...
Belt Cover
$22.54
In Stock
Part Number: FIX10181975
This is a genuine OEM sourced replacement belt cover designed for use with Dewalt miter saws. It helps to cover the belt and protect is as well as the user. It is made out of plastic and it is sold individually. To com...
Outer Clamp
$13.68
In Stock
Part Number: FIX10166601
This is an outer clamp for a miter saw and it is sold individually. It works with another flange (sold separately), to secure the saw blade. The shape of the outer clamp is identical to that of the saw arbor. This stops ...
Ball Bearing
$7.62
In Stock
Part Number: FIX10180911
This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require ...
Retaining Ring
$6.51
In Stock
Part Number: FIX10166028
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft....
Drive Pulley
$17.73
In Stock
Part Number: FIX10186994
A genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. It is an identical replacement for a missing or damaged drive pulley which was originally installed on the...
Belt
$17.12
In Stock
Part Number: FIX10166832
This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153...
Ball Bearing
$20.36
In Stock
Part Number: FIX16680871
This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take t...
Ball Bearing
$36.55
In Stock
Part Number: FIX10169633
This genuine manufacturer approved bearing is used to secure spindle and gear that drive the saw blade. It is designed to minimize the friction, over time bearing will begin to fail compromising units functionality. At t...
Bearing
$6.51
In Stock
Part Number: FIX10170786
This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or roller...
Screw
$6.51
In Stock
Part Number: FIX10169806
This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct locatio...
Wrench
$11.72
In Stock
Part Number: FIX10181217
This is a Genuine OEM replacement part used on Dewalt Miter Saws. This Wrench allows you to secure or remove a Saw Blade. Angular profile of this item makes tightening/loosening the Clamp Bolt easy. This wrench is made f...
Spiral Retaining Ring
$6.51
In Stock
Part Number: FIX10166897
This is a genuine OEM sourced replacement part designed for use with Dewalt miter saws. This is the spiral retaining ring for the drive pulley. It is made out of metal and it is sold individually. To replace it you would...
Ball Bearing
$10.40
On Order
Part Number: FIX10180912
This is an authentic replacement part constructed by the original manufacturer. It is used in DeWALT power tools, including miter saws. Ball bearings are used to buffer moving metal parts. This protects them while also c...
Needle Bearing
$8.13
In Stock
Part Number: FIX10171417
Gasket
$8.13
In Stock
Part Number: FIX10171370
An authentic manufacturer sourced replacement part that is specially produced for use with Dewalt miter saws. This is the gasket that is used to create a seal for the gear case assembly. Over time gaskets may get compres...
Dust Duct Assembly
★★★★★
★★★★★
(1)
$18.54
In Stock
Part Number: FIX10182524
This is a genuine manufacturer approved replacement dust duct assembly. It is specially designed for Dewalt miter saws. Its purpose is to redirect the dust away from the work area and the user. It is made out of plastic ...
Bearing Cup
$6.51
Special Order
Part Number: FIX10181303
This is an authentic OEM sourced component which is specially designed for use with DeWALT and Black and Decker grinders and saws. It provides an identical replacement for a missing or a faulty bearing cup that was insta...
Ball Bearing
$7.62
On Order
Part Number: FIX10186736
This ball bearing is used on some compact routers made by DeWALT and Porter Cable. It is an authentic part made by original manufacturer. Ball bearings reduce friction between moving parts while helping secure them in po...
Spanner Nut M37x1.5 L.h
$6.51
On Order
Part Number: FIX10186698
It is an authentic OEM sourced part which is specially made for use with DeWALT and Porter Cable routers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. The spanner ...
Ball Bearing
$20.38
In Stock
Part Number: FIX10180905
This replacement item is commonly used on angle grinders and hammer drills. It is sourced from original equipment manufacturer. The purpose of a ball bearing is to reduce friction between two connected rotating parts. Be...
Insert Fan End Bearing
$6.51
In Stock
Part Number: FIX10186716
It is a genuine manufacturer-supplied item that is made for use with DeWALT and Porter Cable compact routers. This is a special component which helps to secure the fan end bearing. Unfortunately, over time the material w...
Magnet
$6.51
In Stock
Part Number: FIX10186731
Driven Pulley
$20.74
In Stock
Part Number: FIX10186995
This is a genuine DeWALT manufacturer-supplied item that is specially designed for use with miter saws. It is the special component which supports the belt. This is an identical replacement for a damaged or a missing dri...
Ball Bearing
$11.72
In Stock
Part Number: FIX10169620
This is an authentic OEM part. This part is used in a variety of DeWALT saws. A ball bearing facilitates smooth movement and reduces friction by transmitting the load between moving parts and securing the parts' position...
Bearing
$6.90
Special Order
Part Number: FIX10189249
This is a genuine DeWALT replacement part. The bearing is designed by the manufacturer for use in grinders. This part is made of metal, and is placed in the gear case to allow the armature to spin freely. You will req...
Bearing,needle
$6.51
In Stock
Part Number: FIX10169645
This part is an OEM from DeWalt. The needle bearing is constructed of durable metal, and is made for a variety of power tools. Often used on gear and pinions, this item helps prevent unnecessary pressure on related engin...
Insulator
$6.51
In Stock
Part Number: FIX10186710
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$19.75
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Miter Saw Kerf Plate
$15.59
In Stock
Part Number: FIX10166116
This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to ...
Brush
$10.94
In Stock
Part Number: FIX10186732
This carbon brush is sourced from the original manufacturer and is used with compact routers. This part includes one carbon brush with the wire lead attached. The carbon brush is a general wear part that will require rep...
Brush pair
$14.43
In Stock
Part Number: FIX17060024
Bushing
$11.79
In Stock
Part Number: FIX10183438
This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbling, this is one of ...
Belt Cover
$22.54
In Stock
Part Number: FIX10181975
This is a genuine OEM sourced replacement belt cover designed for use with Dewalt miter saws. It helps to cover the belt and protect is as well as the user. It is made out of plastic and it is sold individually. To com...
Outer Clamp
$13.68
In Stock
Part Number: FIX10166601
This is an outer clamp for a miter saw and it is sold individually. It works with another flange (sold separately), to secure the saw blade. The shape of the outer clamp is identical to that of the saw arbor. This stops ...
Ball Bearing
$7.62
In Stock
Part Number: FIX10180911
This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require ...
Retaining Ring
$6.51
In Stock
Part Number: FIX10166028
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft....
Drive Pulley
$17.73
In Stock
Part Number: FIX10186994
A genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. It is an identical replacement for a missing or damaged drive pulley which was originally installed on the...
Belt
$17.12
In Stock
Part Number: FIX10166832
This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153...
Ball Bearing
$20.36
In Stock
Part Number: FIX16680871
This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take t...
Ball Bearing
$36.55
In Stock
Part Number: FIX10169633
This genuine manufacturer approved bearing is used to secure spindle and gear that drive the saw blade. It is designed to minimize the friction, over time bearing will begin to fail compromising units functionality. At t...
Bearing
$6.51
In Stock
Part Number: FIX10170786
This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or roller...
Screw
$6.51
In Stock
Part Number: FIX10169806
This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct locatio...
Wrench
$11.72
In Stock
Part Number: FIX10181217
This is a Genuine OEM replacement part used on Dewalt Miter Saws. This Wrench allows you to secure or remove a Saw Blade. Angular profile of this item makes tightening/loosening the Clamp Bolt easy. This wrench is made f...
Spiral Retaining Ring
$6.51
In Stock
Part Number: FIX10166897
This is a genuine OEM sourced replacement part designed for use with Dewalt miter saws. This is the spiral retaining ring for the drive pulley. It is made out of metal and it is sold individually. To replace it you would...
Ball Bearing
$10.40
On Order
Part Number: FIX10180912
This is an authentic replacement part constructed by the original manufacturer. It is used in DeWALT power tools, including miter saws. Ball bearings are used to buffer moving metal parts. This protects them while also c...
Needle Bearing
$8.13
In Stock
Part Number: FIX10171417
Gasket
$8.13
In Stock
Part Number: FIX10171370
An authentic manufacturer sourced replacement part that is specially produced for use with Dewalt miter saws. This is the gasket that is used to create a seal for the gear case assembly. Over time gaskets may get compres...
Dust Duct Assembly
★★★★★
★★★★★
(1)
$18.54
In Stock
Part Number: FIX10182524
This is a genuine manufacturer approved replacement dust duct assembly. It is specially designed for Dewalt miter saws. Its purpose is to redirect the dust away from the work area and the user. It is made out of plastic ...
Bearing Cup
$6.51
Special Order
Part Number: FIX10181303
This is an authentic OEM sourced component which is specially designed for use with DeWALT and Black and Decker grinders and saws. It provides an identical replacement for a missing or a faulty bearing cup that was insta...
Ball Bearing
$7.62
On Order
Part Number: FIX10186736
This ball bearing is used on some compact routers made by DeWALT and Porter Cable. It is an authentic part made by original manufacturer. Ball bearings reduce friction between moving parts while helping secure them in po...
Spanner Nut M37x1.5 L.h
$6.51
On Order
Part Number: FIX10186698
It is an authentic OEM sourced part which is specially made for use with DeWALT and Porter Cable routers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. The spanner ...
Ball Bearing
$20.38
In Stock
Part Number: FIX10180905
This replacement item is commonly used on angle grinders and hammer drills. It is sourced from original equipment manufacturer. The purpose of a ball bearing is to reduce friction between two connected rotating parts. Be...
Insert Fan End Bearing
$6.51
In Stock
Part Number: FIX10186716
It is a genuine manufacturer-supplied item that is made for use with DeWALT and Porter Cable compact routers. This is a special component which helps to secure the fan end bearing. Unfortunately, over time the material w...
Magnet
$6.51
In Stock
Part Number: FIX10186731
Driven Pulley
$20.74
In Stock
Part Number: FIX10186995
This is a genuine DeWALT manufacturer-supplied item that is specially designed for use with miter saws. It is the special component which supports the belt. This is an identical replacement for a damaged or a missing dri...
Ball Bearing
$11.72
In Stock
Part Number: FIX10169620
This is an authentic OEM part. This part is used in a variety of DeWALT saws. A ball bearing facilitates smooth movement and reduces friction by transmitting the load between moving parts and securing the parts' position...
Bearing
$6.90
Special Order
Part Number: FIX10189249
This is a genuine DeWALT replacement part. The bearing is designed by the manufacturer for use in grinders. This part is made of metal, and is placed in the gear case to allow the armature to spin freely. You will req...
Bearing,needle
$6.51
In Stock
Part Number: FIX10169645
This part is an OEM from DeWalt. The needle bearing is constructed of durable metal, and is made for a variety of power tools. Often used on gear and pinions, this item helps prevent unnecessary pressure on related engin...
Insulator
$6.51
In Stock
Part Number: FIX10186710
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$19.75
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less

Model Compatibility

This part works with the following models:
Fix Number: FIX10188435
Manufacturer Part Number: N110359
Brand Model Number Description
Porter Cable 22-7301-56 Laminate Trimmer - 220v Laminate Trim
Delta 23-9748-50SEV Reciprocating Saw - Pc 230v Tiger Saw
DeVilbiss 24544SE Angle Grinder - Sears Craftsman 4-1/2 In
DeVilbiss 26436 Angle Grinder - 4-1/2 Sm.Ang.Grndr
DeVilbiss 26437 Angle Grinder - 4-1/2 Small Angle Grinder
DeVilbiss 26437OS Angle Grinder - 4-1/2 Angle Grinder
DeWALT 26742 Angle Grinder - Angle Grinder
DeVilbiss 27325 Angle Grinder - 4-1/2 Sm.Ang.Grndr
DeVilbiss 27326 Angle Grinder - 4-1/2 Small Angle Grinder
DeVilbiss 27327 Angle Grinder - 4-1/2 Small Angle Grinder
DeVilbiss 27703 Grinder - 4-1/2 Ra Grinder - Sears
DeVilbiss 27742 Grinder - 4-1/2 Ra Grinder - Sears
DeVilbiss 27743 Grinder - 4-1/2 Ra Grinder - Sears
Porter Cable 690 Router - Router 1 1/2 Hp
DeVilbiss 694917 Router - 1-1/2 Hp Routermotor
Porter Cable 7345 Sander - 5in Sander
DeVilbiss 7551 Drill - 1/4drilldhandle Govt
DeVilbiss 874798 Laminate Trimmer - Laminate Trimmer
Porter Cable 97455 Sander - 5in Sander
Porter Cable 97466 Sander - 6in Sander
Craftsman CMEE145 Sander Grinder - Disc Sander
DeWALT D25263KR Hammer Drill - Rotary Hammer
DeWALT D25553K Hammer Drill - Rotary Hammer
DeWALT D25604K Hammer Drill - 1-3/4 Sds Max Hamm
DeWALT D25604K-AR Hammer Drill - 1-3/4 Sds Max Hammer W/
DeWALT D25604K-B2 Hammer Drill - 1-3/4 Sds Max Hammer W/
DeWALT D25604K-B3 Hammer Drill - 1-3/4in Sds Max Hammer W/
DeWALT D25614K Hammer Drill - 1-3/4 Sds Mx Cmb Ham
DeWALT D25614K-AR Hammer - 6kg 45mm Sds Max Combi Rotary Hammer
DeWALT D25614K-B2 Hammer - 6kg 45mm Sds Max Combi Rotary Hammer
Bearing
$ 6.51
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.