Part Location Diagram of 1603435068 Dremel Thread-Forming tap. Screw DIN 7500
See part 49 in the diagram
( Grid squares measure 1x1 inch )

Thread-Forming tap. Screw DIN 7500 1603435068

$ 2.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10259883
Manufacturer #:
1603435068
Manufactured by:
Dremel

Product Description

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in grinders and saws from Skil, Bosch, and Dremel. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this part. This item is sold individually.