Airstream Parts

Fix Number

FIX10040076

Manufacturer Part Number

A100987

It is a genuine manufacturer-supplied item that is made for use with Powermate, Southland and Airstream lawn edgers. This item provides an identical replacement for a damaged or a missing drive shaft assembly that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. Note, this high-quality assembly is made of durable metal and is sold individually. A wrench set and pliers might be needed when replacing this component.

Fix Number

FIX10039826

Manufacturer Part Number

A100630

This OEM replacement part is supplied directly from the original parts manufacturer for use with various models of lawn edgers. The air cleaner housing secures the filter element and prevents any excess dust and debris from entering the engine. This part is made of a high-quality plastic and is sold separately.

★★★★★

★★★★★

1 Review

Fix Number

FIX9871915

Manufacturer Part Number

089210136012

This is a genuine replacement part sourced from the original manufacturer for use with edgers, sanders, and miter saws. The special ball bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This ball bearing is available as an individual replacement please see model diagram for associative parts.

Fix Number

FIX10039670

Manufacturer Part Number

A100493

This is a genuine OEM sourced component which is specially designed for use with lawn edgers. It is an identical replacement for a worn or stretched belt that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality belt is made of durable rubber and is sold individually.

Fix Number

FIX12123695

Manufacturer Part Number

A202711

This fuel tank is an authentic replacement part sourced directly from the original equipment manufacturer. It is compatible with a variety of models and brands of lawn edgers. This tank is designed to contain the fuel needed to power the machinery. It should be replaced if it is damaged or there is rust inside. To replace it, you must empty the fuel from the tank. Remove the fuel line by undoing the bolts securing it using a socket set. Install the tank and secure the fuel line again. NOTE: The fuel cap, part number A100622 only fits the older version of the tank, part number A100783. Part number A202712 fuel cap will fit this newer tank.

Fix Number

FIX10039821

Manufacturer Part Number

A100625

It is a genuine item that is supplied by the original equipment manufacturer for use with lawn edgers. This is an identical replacement for a missing or a faulty hose that is utilized to deliver the fuel. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable rubber and is sold individually. Note, the <a href="http://www.ereplacementparts.com/clamp-fuel-line-p-769947.html" target=blank><u>#A100624 Clamp, Fuel Line </u></a> is sold separately.

Fix Number

FIX10039825

Manufacturer Part Number

A100629

The sustain board attaches to the air cleaner element. This is a genuine replacement part sourced from the original manufacturer for use with edgers made by Powermate, Homelite, Southland, and Airstream. It is made out of plastic and is sold individually. During replacement, it may require a screwdriver to help install this part correctly. It may become broken and will need to be replaced.

Fix Number

FIX10039823

Manufacturer Part Number

A100627

This genuine manufacturer-approved replacement part, it is specially designed for use with lawn edgers. The purpose of this gasket is to create an air-tight seal for the air cleaner. Over time gaskets tend to get compressed and crack eventually requiring replacement to maintain a proper seal. It is made of high-quality composite material and it is sold individually.

Fix Number

FIX10040096

Manufacturer Part Number

A101009

This is an original replacement part manufactured for use with lawn edgers. The ignition coil is used to create an electric charge when the magnet on the flywheel passes the coil. The ignition coil sends the electric charge to the spark plug that creates an electric arc to ignite the fuel in the cylinder. If the ignition coil fails the engine will not likely be able to start. This ignition coil is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX10040071

Manufacturer Part Number

A100982

This is a Powermate, Southland, and Airstream replacement part directly sourced from the manufacturer for use in edgers. The air cleaner cover goes next to the air cleaner element. It might require a screwdriver and a socket set to replace this item. It will need to be replaced if it breaks. This part is made of a durable material and is available individually.