Models
>
11A-064A205
11A-064A205 ((1999)) Yard Machines Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$5.84
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...
In Stock
In Stock
$4.99
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from PITTSBURGH, PA
- Parts Used:
- 731-1029
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this instruction helpful to you?
Thank you for voting!