YMMV4203DB00 Whirlpool - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lori from Salt Lake City, UT
- Parts Used:
- 6802A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grease filters were missing from the over-the-stove microwave
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Crescent City, CA
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Turn table wouldn't turn in my microwave.
This was no big deal. Just inserted the new gadget under the turntable. It beginning turning as soon as I pressed start on the microwave.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn't expect it for a week. Thank you.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn't expect it for a week. Thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLARD from SHINNSTON, WV
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
coupler under plate in microwave broken
We ordered part from store where we bought the microwave. We waited a week and the part was not the right one. I found the part I needed at your company. I received the part the next day. I just inserted the coupler in the hole where the other one was and fixed the problem imediately. We will buy all our parts here from now on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ted from Hudson, NH
- Parts Used:
- DE91-70063D
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Buzzing noise, no heating of food
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joel from CAMBRIDGE, MA
- Parts Used:
- DE91-70063D
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
Appears to work, but food not heated
The high voltage tired was shorted. I replaced it with a new one, but that did not solve the problem.
You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.
You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi meter. Search for the procedures on YouTube.
I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.
When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.
In the end I ordered a new microwave.
You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.
You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi meter. Search for the procedures on YouTube.
I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.
When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.
In the end I ordered a new microwave.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOE from WEST LAWN, PA
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Microwave turntable would not turn
Pulled out the old couple and inserted the new one; very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- TIFFINI from BUFFALO, WY
- Parts Used:
- WP3405-001034
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave would continue to run even when door was open. (even if no time was left on timer)
Unplugged Microwave, Removed vent cover (2 screws on top of microwave, then slide cover to the left, then forward) Removed control panel (1 screw at top of panel) then removed the two screws that hold in the door switch assembly. (these you will only see by opening the microwave). Located lower door switch, removed connecting wires, and pulled switch by releasing small plastic tab which held it in. Put new switch in place, reconnected wires, then reconnected door switch assembly. Reconnected control panel, and then put the vent cover back on. Tested microwave and it no longer runs when the door is open. Super easy fix, and was done in under 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Warrenville, IL
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Coupler broke - no rotation of glass plate in microwave
just stuck in in the hole - no tools needed - very easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- louis from PARRISH, FL
- Parts Used:
- DE91-70063D
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Microwave stopped working - would not heat up
I removed the outer cover and exposed the inner workings. I watched a video on partselect.com to show how to remove and replace the Diode. I followed the instructions and it was very easy to replace.
Unfortunately, the diode was only part of the issue. I ended up replacing the High Voltage capacitor and Magnetron also. Those were a little more complicated but still easy to do.
Now the Microwave works just like new! Cost me less than $100 for all parts.
Unfortunately, the diode was only part of the issue. I ended up replacing the High Voltage capacitor and Magnetron also. Those were a little more complicated but still easy to do.
Now the Microwave works just like new! Cost me less than $100 for all parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from PEMBROKE PNES, FL
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Microwave plate was not turning
Just popped the new coupler in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linus from Grey Eagle, MN
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turn table would not rotate
Removed old coupler put in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Dix Hills, NY
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
disk did not rotate!
I looked up maytag Model on internet and located part. Ordered part on internet and replaced part on maytag microwave.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SALLY from LAGUNA NIGUEL, CA
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Turntable stopped turning
I tried before to replace the coupler but ordered the wrong part from a different company. Your website allowed me to narrow down the search and choose the correct coupler from about 8 different choices.It took me literally 2 minutes to fix my turn table. I am a single mom with a disabled child, so the option of paying a repairman to fix my microwave was not an option. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Hudson, FL
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turntable would not turn. The coupler was broken
All I did was removed the glass revolving tray and insert the coupler. Couldn't have been any simpler and the turntable was working again. Part was received the same week it was ordered. Very quick and didn't use any gas to go out somewhere and look for the part. Very pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Irene, SD
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
piece holding turntable plate broke off
strategically placed coupler in the hole and wallah! placed the plate back on it and watched her go around! Feel like a genius! lol
Was this instruction helpful to you?
Thank you for voting!