Models
>
WTW4855HW3
WTW4855HW3 Whirlpool Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$39.63
The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
Order now and your part arrives by Apr 11
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
In Stock
Order now and your part arrives by Apr 11
$11.98
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order now and your part arrives by Apr 11
$67.93
If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the w...
In Stock
Order now and your part arrives by Apr 11
$52.50
This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd nois...
In Stock
Order now and your part arrives by Apr 11
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Special Order
In Stock
Order now and your part arrives by Apr 11
In Stock
Order now and your part arrives by Apr 11
$48.21
The drive belt is an essential part of the washing machine’s mechanical system. It connects the drive motor to the drive system, enabling the washing machine’s basket to spin. If your washing machine ...
In Stock
Order now and your part arrives by Apr 11
In Stock
Order now and your part arrives by Apr 11
$91.72
This suspension rod kit helps stabilize the washer drum during operation, reducing excessive shaking and vibration throughout the wash cycle. Each rod measures 26.5 inches in length and features a hoo...
In Stock
Order now and your part arrives by Apr 11
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe ...
In Stock
Order now and your part arrives by Apr 11
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nicole
January 19, 2026
My washer sounds as it is stuck on the draining cycle. It starts on its own intermittently (draining cycle), & most times the cancel button does not clear. Also some times me unplugging & plugging back in doesn't work, so I have to wait a few hours, then it will reset.
For model number WTW4855HW3
Hello Nicole, thank you for getting in touch. According to the desciption of the issue, there could be a fault with the main control board (PCB). You will need to replace the control board, part number FIX16744865, to fix the issue. Ensure the drain hose isn't kinked, crushed, or inserted too far down the standpipe, which can cause siphoning or blockages. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for WTW4855HW3
Viewing 15 of 15Will not agitate
Fixed by these parts
How to fix it
Spinning Issues
Fixed by these parts
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
How to fix it
Cycle Not Advancing
Fixed by these parts
How to fix it
Shaking and Moving
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Locking Issues
Fixed by these parts
How to fix it
No hot or cold water
Fixed by these parts
How to fix it
Water Filling Issues
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Draining Issues
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from BLOOMINGTON, IN
- Parts Used:
- W10721967
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from MURPHYSBORO, IL
- Parts Used:
- W11210459
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Water would not fill the washer except for 4 inches.
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from BEAVER DAMS, NY
- Parts Used:
- W11307244
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
latch switch was not working
unfasten top from back, slide top forward and lift up, remove switch and cable (one piece), in stall new switch and cable, put top down and slide back, reinstall screws.
Was this instruction helpful to you?
Thank you for voting!