Models > 7MWFC9822HC1

7MWFC9822HC1 Whirlpool Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 7MWFC9822HC1

Viewing 6 of 6
Dispenser parts Diagram and Parts List for Whirlpool Washer Dryer Combo
Dispenser parts
Hmi and door parts Diagram and Parts List for Whirlpool Washer Dryer Combo
Hmi and door parts
Optional parts (not included) Diagram and Parts List for Whirlpool Washer Dryer Combo
Optional parts (not included)
Top and cabinet parts Diagram and Parts List for Whirlpool Washer Dryer Combo
Top and cabinet parts
Tub and basket parts Diagram and Parts List for Whirlpool Washer Dryer Combo
Tub and basket parts
Water system parts Diagram and Parts List for Whirlpool Washer Dryer Combo
Water system parts
Keep searches simple, eg. "belt" or "pump".
Hose Clamp – Part Number: WP596669
$11.80
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
In Stock
Spray Paint - 12 oz. - White – Part Number: 350930
$22.68
In Stock
Leveling Leg Locking Nut – Part Number: WP3359452
$7.76
This nut is sold individually. Size: 3/8-16
In Stock
Hose Clamp – Part Number: WP616099
$9.81
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
In Stock
Hose Clamp – Part Number: WP356138
$10.83
This clamp helps to prevent leaking by holding the end of water hose in place.
In Stock
STACK KIT FOR LONG VENT DRYER – Part Number: W10869845
$62.53
In Stock
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
$12.60
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
In Stock
STRIKE – Part Number: W11316914
$20.63
In Stock
LATCH – Part Number: W11565030
$65.32
Genuine OEM door latch for your washer
In Stock
Screw – Part Number: WP8540282
$11.97
In Stock
Boot Seal Retaining Ring – Part Number: W11266654
$16.17
In Stock
Washer Leveling Leg – Part Number: W10888529
$14.33
The Leveling leg supports the washing machine. Adjust the height of the levelling leg to make the washer level.
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 7MWFC9822HC1

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Replacing the Hose Clamp

Replacing the Hose Clamp

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Howard from Boynton Beach, FL
Parts Used:
350930
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Read less
22 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frederick from OSWEGO, NY
Parts Used:
W11688995
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Fabric Softener dispenser would not drain out
Replaced the Whirlpool washer water inlet valve.
1. Unplug washer
2. Close Hot and Cold water valves
3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove.
4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. ... Read more />5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little.
Replace with the new one, connect hoses, put cover back on, open valves, plug it in.
6. Ran washer and Fabric Softener dispenser now works
Read less
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terry from JUPITER, FL
Parts Used:
W11266654
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
It took two of us to hold the ring and slide it on around the opening with the assistance of screwdrivers the spring was very tight
Two people to screwdrivers, stretching the spring out and around and that’s the last part to go on
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More